3D print files for car interiors

Gauge pods for 52 mm gauges, cockpit mounts and parts for your car model, from classics to current models. Designed for model and year, print-ready as STL and 3MF, STEP on request.

Find parts for my carRequest a custom design

Which car interior parts are available?

Magmacode offers digital 3D print files (STL, 3MF, STEP) for pods for 52 mm gauges, cockpit mounts and parts designed for one specific car model and model year – from classics to current cars. We do not sell printed parts.

By make and model

By part type

Designed for your model and year

A part meant to fit every car fits none properly. That is why every product page says which car it is for and how reliable the dimensions are.

  1. Model, year, faceliftFacelifts often change exactly where the part sits. We state the years precisely.
  2. Fit levelMeasured, cited or estimated – estimated dimensions come with adjustment margin and a test ring.
  3. Airbag zonesChecked for every car. A-pillar parts only without curtain airbags.
All makes and models

Files for the interior

View all parts

What a dashboard has to withstand

After an hour in the sun a dashboard averages 69 °C, with peaks of 89 °C. Every file therefore names the right filament for where it is mounted.

  • Dashboard in the sun: avg. 69, peak 89 °C
  • PLA 55–60 °C
  • PETG ~80 °C
  • ASA ~108 °C
Top: dashboard surface after 1 h of sun. Bottom: glass transition / softening point of the filaments.
Guide: PETG or ASA?

Good to know before installing

Which filament works for parts inside a car?

ASA or ABS for anything in the sun – a dashboard averages about 69 °C with peaks of 89 °C. PETG is fine in the shade (air vent, centre console). PLA is unsuitable; it softens at about 55–60 °C.

How is airbag safety handled?

For every model and year we check where the airbags are. A-pillar parts are only offered for cars without curtain airbags; nothing is mounted in a deployment zone.

What if there is no part for my car yet?

Request a custom design: tell us the car, model year, mounting location and gauge size and upload photos and measurements. We design the part and then add the file to the shop.

Guides