Single DIN switch panel for 6 or 4 rocker switches (Contura 36.8 × 21 mm) with gauge installed
  • Single DIN switch panel for 6 or 4 rocker switches (Contura 36.8 × 21 mm) from behind, cable exit
  • Single DIN switch panel for 6 or 4 rocker switches (Contura 36.8 × 21 mm) without gauge
  • Single DIN switch panel for 6 or 4 rocker switches (Contura 36.8 × 21 mm) with gauge installed

Universal – fits any car

Single DIN switch panel for 6 or 4 rocker switches (Contura 36.8 × 21 mm) – universal

Single-DIN panel with cutouts for Contura rocker switches (ARB, Carling, Narva). Clamps in without drilling.

Choose a version
€3.99incl. VAT

Sale and payment processing by Sold through Link, LLC (Stripe); Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

  • Instant download
  • Updates included
  • Secure via Stripe

Description

The panel fits any single-DIN slot to ISO 7736 and takes six or four Contura-style rocker switches: cutout 36.8 × 21.1 mm, as used by ARB, Carling, Narva and many LED rocker switches for driving lights, light bars or compressors.

  • The switches stand upright and snap straight into the faceplate.
  • Face thickness 2.0 or 3.0 mm (default 2.5 mm) to suit your switches' snap-in tabs.
  • The sleeve clamps into the DIN cage with crush ribs. Nothing is drilled.
  • Prints face-down on the bed: smooth visible side, no supports.

Cutout +0.2 mm clearance; pick the face thickness from your switch's datasheet.

Dimensions

Width186 mm
Height32 mm
Depth60 mm
Weight (printed)58 g
Layer height0.2 mm
Walls4
Infill20 %

Dimensions of the default variant in print orientation.

Material and temperature

Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Print orientation: Faceplate down on the bed, sleeve pointing up.

Guide: PETG or ASA in a car?

Safety notice

Always wire loads through a fuse and relay; do not run high currents directly through the switches. Install at your own risk. Never mount in an airbag deployment zone, never cover controls, never restrict the view. Follow the material and temperature advice. Add-ons may affect the type approval of the vehicle (§ 19 StVZO in Germany); keep edges in the head and knee area rounded (UN Regulation No. 21).

Not an original part. No affiliation with the vehicle manufacturers named; make and model names only indicate fitment.

What's included

  • 1-din-schalterblende-contura-wippschalter_6x_front2-0.stl – STL – print-ready mesh
  • 1-din-schalterblende-contura-wippschalter_6x_front2-0.3mf – 3MF – with print profile
  • 1-din-schalterblende-contura-wippschalter_6x_front2-0.step – STEP – editable in CAD
  • 1-din-schalterblende-contura-wippschalter_6x_front3-0.stl – STL – print-ready mesh
  • 1-din-schalterblende-contura-wippschalter_6x_front3-0.3mf – 3MF – with print profile
  • 1-din-schalterblende-contura-wippschalter_6x_front3-0.step – STEP – editable in CAD
  • 1-din-schalterblende-contura-wippschalter_4x_front2-0.stl – STL – print-ready mesh
  • 1-din-schalterblende-contura-wippschalter_4x_front2-0.3mf – 3MF – with print profile
  • 1-din-schalterblende-contura-wippschalter_4x_front2-0.step – STEP – editable in CAD
  • 1-din-schalterblende-contura-wippschalter_4x_front3-0.stl – STL – print-ready mesh
  • 1-din-schalterblende-contura-wippschalter_4x_front3-0.3mf – 3MF – with print profile
  • 1-din-schalterblende-contura-wippschalter_4x_front3-0.step – STEP – editable in CAD
VersionContainsPrice
6 switches · 2.0 mm face1-din-schalterblende-contura-wippschalter_6x_front2-0.stl, 1-din-schalterblende-contura-wippschalter_6x_front2-0.3mf, 1-din-schalterblende-contura-wippschalter_6x_front2-0.step€3.99
6 switches · 3.0 mm face1-din-schalterblende-contura-wippschalter_6x_front3-0.stl, 1-din-schalterblende-contura-wippschalter_6x_front3-0.3mf, 1-din-schalterblende-contura-wippschalter_6x_front3-0.step€3.99
4 switches · 2.0 mm face1-din-schalterblende-contura-wippschalter_4x_front2-0.stl, 1-din-schalterblende-contura-wippschalter_4x_front2-0.3mf, 1-din-schalterblende-contura-wippschalter_4x_front2-0.step€3.99
4 switches · 3.0 mm face1-din-schalterblende-contura-wippschalter_4x_front3-0.stl, 1-din-schalterblende-contura-wippschalter_4x_front3-0.3mf, 1-din-schalterblende-contura-wippschalter_4x_front3-0.step€3.99

You will also need

  • 6 × Contura-style rocker switch, 36.8 × 21.1 mm cutout

Printing

  1. Print in PETG or ASA, 0.2 mm layers, 4 walls, 20 % infill, no supports. No PLA.

Installation

  1. Remove the radio or DIN blank; the DIN cage stays in the car.
  2. Snap the switches in from the front and wire them at the back (don't forget fuse and relay).
  3. Push the panel straight into the DIN cage until the faceplate sits flush.

Guides for this part

FAQ

Which material should I use for this switch panel?

Recommended: PETG (alternatively ASA, ABS). Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Version 1.0.0, updated 1 November 2026 · SKU SWP-UNI-DIN1-6X

All switch panels