Single DIN panel for 3× 52 mm gauges with gauge installed
  • Single DIN panel for 3× 52 mm gauges from behind, cable exit
  • Single DIN panel for 3× 52 mm gauges without gauge
  • Single DIN panel for 3× 52 mm gauges with gauge installed

Universal – fits any car

Single DIN panel for 3× 52 mm gauges – universal (ISO 7736)

Replaces a single-DIN radio or blank and holds three or two 52 mm gauges. Clamps into the DIN cage without drilling.

Choose a version
€5.99incl. VAT

Sale and payment processing by Sold through Link, LLC (Stripe); Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

  • Instant download
  • Updates included
  • Secure via Stripe

Description

The panel fits any single-DIN slot to ISO 7736 (opening 182 × 53 mm) and holds three – or two – 52 mm gauges.

  • The sleeve clamps into the DIN cage with crush ribs, no drilling.
  • The faceplate (186 × 60 mm) covers the opening.
  • Cables run through the faceplate into the slot.
  • One M3 set screw per gauge secures them.

Note: a 52 mm gauge is taller than the 50 mm DIN slot, so the gauges sit in cups in front of the panel. Variants for 45 mm and 55 mm gauge depth.

Crush ribs absorb cage tolerances; bore +0.4 mm, verify with the test ring.

Dimensions

Width186 mm
Height79 mm
Depth62 mm
Bore52.79 mm
Weight (printed)141 g
Layer height0.2 mm
Walls4
Infill20 %

Dimensions of the default variant in print orientation.

Material and temperature

Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Print orientation: Sleeve down on the bed, cups pointing up.

Guide: PETG or ASA in a car?

Safety notice

Use in the DIN slot only. The cups must not cover controls, warning lights or airbag covers. Install at your own risk. Never mount in an airbag deployment zone, never cover controls, never restrict the view. Follow the material and temperature advice. Add-ons may affect the type approval of the vehicle (§ 19 StVZO in Germany); keep edges in the head and knee area rounded (UN Regulation No. 21).

Not an original part. No affiliation with the vehicle manufacturers named; make and model names only indicate fitment.

What's included

  • toleranz-testring-52mm.stl – Tolerance test ring
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.stl – STL – print-ready mesh
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.3mf – 3MF – with print profile
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.step – STEP – editable in CAD
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.stl – STL – print-ready mesh
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.3mf – 3MF – with print profile
  • 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.step – STEP – editable in CAD
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.stl – STL – print-ready mesh
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.3mf – 3MF – with print profile
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.step – STEP – editable in CAD
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.stl – STL – print-ready mesh
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.3mf – 3MF – with print profile
  • 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.step – STEP – editable in CAD
VersionContainsPrice
2 gauges · up to 45 mm deeptoleranz-testring-52mm.stl, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.stl, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.3mf, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe45.step€5.99
2 gauges · up to 55 mm deeptoleranz-testring-52mm.stl, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.stl, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.3mf, 1-din-radioschacht-gauge-panel-52mm_2x_tiefe55.step€5.99
3 gauges · up to 45 mm deeptoleranz-testring-52mm.stl, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.stl, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.3mf, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe45.step€5.99
3 gauges · up to 55 mm deeptoleranz-testring-52mm.stl, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.stl, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.3mf, 1-din-radioschacht-gauge-panel-52mm_3x_tiefe55.step€5.99

You will also need

  • 3 × M3 set screw or self-tapping M3 screw, 8–10 mm

Printing

  1. Print the tolerance test ring first and test-fit the gauge.
  2. Print in PETG or ASA, 0.2 mm layers, 4 walls, 20 % infill, no supports. The sleeve sits on the bed; the faceplate bridges the inside of the sleeve. No PLA.

Installation

  1. Remove the radio or DIN blank; the DIN cage stays in the car.
  2. Feed the gauge cables through the faceplate to the back.
  3. Insert the gauges and secure them with M3 set screws.
  4. Push the panel straight into the DIN cage until the faceplate sits flush.

Guides for this part

FAQ

Which material should I use for this gauge panel?

Recommended: PETG (alternatively ASA, ABS). Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Do 60 mm gauges fit?

Only if the body is 52 mm and just the bezel is larger. The bezel then rests on the front; with several gauges side by side their spacing limits the bezel (see the bezel question below). This pod is not made for gauges with a 60 mm body. If unsure, print the included tolerance test ring.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

How large may the gauges' front ring be?

At most Ø 59.5 mm per gauge: that is the spacing between the gauges. A Defi 52 with its 58.3 mm ring just fits side by side.

Version 2.0.0, updated 2 November 2026 · SKU GPN-UNI-DIN1-3X52

Gauge panels (DIN slot) for other cars

All gauge panels (din slot)