Trackside cabinet set, neutral – two sizes, with and without plinth, Z, N, TT, H0

Description

Cabinets belong next to every turnout, signal and level crossing. This set brings two neutral sizes with door seams and roof cap, optionally on a concrete plinth.

• Two sizes: tall and narrow with one door, wide with two doors.
• With or without plinth, engraved door seams, no logo, type plate or lettering.
• Dummy: nothing carries current.

In the set per scale:

• Size 1 (one door): H × W × D 1355 × 780 × 315 mm; Z 6.16 × 3.55 × 1.43 mm, N 8.47 × 4.88 × 1.97 mm, TT 11.29 × 6.5 × 2.62 mm, H0 15.57 × 8.97 × 3.62 mm
• Size 2 (two doors): H × W × D 1005 × 1110 × 315 mm; Z 4.57 × 5.05 × 1.43 mm, N 6.28 × 6.94 × 1.97 mm, TT 8.38 × 9.25 × 2.62 mm, H0 11.55 × 12.76 × 3.62 mm
• Both sizes without and with plinth.

Scales: One variant per scale: Z (1:220), N (1:160), TT (1:120) and H0 (1:87). Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).

Dimensions: Prototype dimensions from trade size of a cable distribution cabinet (Hager catalogue, not railway-specific), divided by the scale. We found no railway-specific dimension; the size follows the trade size, so size, roof cap, door seams and plinth are an estimate, not true to the prototype. How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge first to see in advance whether clearance and distances suit your setup.

Material: Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Dimensions

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Print orientation: Resin: tilted by about 30–45° on light supports. FDM: Standing on the underside.

Safety notice

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children. Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Uncured resin is an irritant: wear nitrile gloves, ventilate well, follow the resin manufacturer’s instructions and fully post-cure the parts.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

• STL – print-ready mesh
• 3MF – with print profile
• STEP – editable in CAD

Files per version

Version	Contains	Price
Z (1:220)	schaltkasten-set-neutral_z_sammelplatte.stl, schaltkasten-set-neutral_z_sammelplatte.3mf, schaltkasten-set-neutral_z_sammelplatte.step, schaltkasten-set-neutral_z_groesse_1.stl, schaltkasten-set-neutral_z_groesse_1.3mf, schaltkasten-set-neutral_z_groesse_1.step, schaltkasten-set-neutral_z_groesse_1_mit_sockel.stl, schaltkasten-set-neutral_z_groesse_1_mit_sockel.3mf, schaltkasten-set-neutral_z_groesse_1_mit_sockel.step, schaltkasten-set-neutral_z_groesse_2.stl, schaltkasten-set-neutral_z_groesse_2.3mf, schaltkasten-set-neutral_z_groesse_2.step, schaltkasten-set-neutral_z_groesse_2_mit_sockel.stl, schaltkasten-set-neutral_z_groesse_2_mit_sockel.3mf, schaltkasten-set-neutral_z_groesse_2_mit_sockel.step	€1.90
N (1:160)	schaltkasten-set-neutral_n_sammelplatte.stl, schaltkasten-set-neutral_n_sammelplatte.3mf, schaltkasten-set-neutral_n_sammelplatte.step, schaltkasten-set-neutral_n_groesse_1.stl, schaltkasten-set-neutral_n_groesse_1.3mf, schaltkasten-set-neutral_n_groesse_1.step, schaltkasten-set-neutral_n_groesse_1_mit_sockel.stl, schaltkasten-set-neutral_n_groesse_1_mit_sockel.3mf, schaltkasten-set-neutral_n_groesse_1_mit_sockel.step, schaltkasten-set-neutral_n_groesse_2.stl, schaltkasten-set-neutral_n_groesse_2.3mf, schaltkasten-set-neutral_n_groesse_2.step, schaltkasten-set-neutral_n_groesse_2_mit_sockel.stl, schaltkasten-set-neutral_n_groesse_2_mit_sockel.3mf, schaltkasten-set-neutral_n_groesse_2_mit_sockel.step	€1.90
TT (1:120)	schaltkasten-set-neutral_tt_sammelplatte.stl, schaltkasten-set-neutral_tt_sammelplatte.3mf, schaltkasten-set-neutral_tt_sammelplatte.step, schaltkasten-set-neutral_tt_groesse_1.stl, schaltkasten-set-neutral_tt_groesse_1.3mf, schaltkasten-set-neutral_tt_groesse_1.step, schaltkasten-set-neutral_tt_groesse_1_mit_sockel.stl, schaltkasten-set-neutral_tt_groesse_1_mit_sockel.3mf, schaltkasten-set-neutral_tt_groesse_1_mit_sockel.step, schaltkasten-set-neutral_tt_groesse_2.stl, schaltkasten-set-neutral_tt_groesse_2.3mf, schaltkasten-set-neutral_tt_groesse_2.step, schaltkasten-set-neutral_tt_groesse_2_mit_sockel.stl, schaltkasten-set-neutral_tt_groesse_2_mit_sockel.3mf, schaltkasten-set-neutral_tt_groesse_2_mit_sockel.step	€1.90
H0 (1:87)	schaltkasten-set-neutral_h0_sammelplatte.stl, schaltkasten-set-neutral_h0_sammelplatte.3mf, schaltkasten-set-neutral_h0_sammelplatte.step, schaltkasten-set-neutral_h0_groesse_1.stl, schaltkasten-set-neutral_h0_groesse_1.3mf, schaltkasten-set-neutral_h0_groesse_1.step, schaltkasten-set-neutral_h0_groesse_1_mit_sockel.stl, schaltkasten-set-neutral_h0_groesse_1_mit_sockel.3mf, schaltkasten-set-neutral_h0_groesse_1_mit_sockel.step, schaltkasten-set-neutral_h0_groesse_2.stl, schaltkasten-set-neutral_h0_groesse_2.3mf, schaltkasten-set-neutral_h0_groesse_2.step, schaltkasten-set-neutral_h0_groesse_2_mit_sockel.stl, schaltkasten-set-neutral_h0_groesse_2_mit_sockel.3mf, schaltkasten-set-neutral_h0_groesse_2_mit_sockel.step	€1.90

Printing

1. Resin, 0.05 mm layers: tilt the single parts by about 30–45° in the resin slicer and add light supports, on undersides and backs rather than visible faces.
2. After printing, wash the parts (cleaner as specified by the resin manufacturer), remove the supports and post-cure them fully under UV light.
3. FDM (H0, TT): PLA, 0.2 mm nozzle, 0.08 mm layers, no supports, as the files are laid out.

FAQ

Reviews

No reviews yet.

How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

Version 2.0.0, updated 5 November 2026 · SKU MB-CABINETS