200 l drum with placeholder track (no brand)

Model railway accessories

200 l drum – tight-head and open-head, on a pallet and stacked lying, Z, N, TT, H0

Steel drums as loads and workshop props: tight-head, open-head, four on a pallet and five stacked lying. Prototype dimensions divided by the scale.

Choose a version
€1.50incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

The 200 litre drum stands at loading roads, in front of engine sheds and on open wagons. The set contains both designs and two ready-made groups that go straight onto the wagon or ramp.

  • Tight-head drum with two bungs and open-head drum with clamping ring, each with two rolling hoops.
  • Four drums on a pallet and five stacked lying, each as one part.
  • No lettering and no hazard labels.

In the set per scale:

  • Drum: prototype Ø 585 × 884 mm; Z Ø 2.66 × 4.02 mm, N Ø 3.66 × 5.53 mm, TT Ø 4.88 × 7.37 mm, H0 Ø 6.72 × 10.16 mm
  • Tight-head drum (two bungs), open-head drum (clamping ring), four drums on a pallet and five drums stacked lying down.

Scales: One variant per scale: Z (1:220), N (1:160), TT (1:120) and H0 (1:87). Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).

Dimensions: Prototype dimensions from Berlin Packaging manufacturer data (steel tight-head drum 216.5 l) and Tank und Lager dealer data, divided by the scale. Dealers state 877 to 897 mm height; 884 mm is used here. Rolling hoops, chimes, bungs, clamping ring and the 1200 × 1200 mm pallet are an estimate, not true to the prototype. How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge first to see in advance whether clearance and distances suit your setup.

Material: Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Dimensions

Width7 mm
Height10 mm
Depth7 mm
Weight (printed)4 g
Layer height0.05 mm

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Print orientation: Resin: tilted by about 30–45° on light supports. FDM: Standing; the lying stack on its underside.

Safety notice

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children. Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Uncured resin is an irritant: wear nitrile gloves, ventilate well, follow the resin manufacturer’s instructions and fully post-cure the parts.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
Z (1:220)fass-200-liter-spund-und-deckelfass_z_sammelplatte.stl, fass-200-liter-spund-und-deckelfass_z_sammelplatte.3mf, fass-200-liter-spund-und-deckelfass_z_sammelplatte.step, fass-200-liter-spund-und-deckelfass_z_spundfass.stl, fass-200-liter-spund-und-deckelfass_z_spundfass.3mf, fass-200-liter-spund-und-deckelfass_z_spundfass.step, fass-200-liter-spund-und-deckelfass_z_deckelfass.stl, fass-200-liter-spund-und-deckelfass_z_deckelfass.3mf, fass-200-liter-spund-und-deckelfass_z_deckelfass.step, fass-200-liter-spund-und-deckelfass_z_palette_4_faesser.stl, fass-200-liter-spund-und-deckelfass_z_palette_4_faesser.3mf, fass-200-liter-spund-und-deckelfass_z_palette_4_faesser.step, fass-200-liter-spund-und-deckelfass_z_liegend_gestapelt.stl, fass-200-liter-spund-und-deckelfass_z_liegend_gestapelt.3mf, fass-200-liter-spund-und-deckelfass_z_liegend_gestapelt.step€1.50
N (1:160)fass-200-liter-spund-und-deckelfass_n_sammelplatte.stl, fass-200-liter-spund-und-deckelfass_n_sammelplatte.3mf, fass-200-liter-spund-und-deckelfass_n_sammelplatte.step, fass-200-liter-spund-und-deckelfass_n_spundfass.stl, fass-200-liter-spund-und-deckelfass_n_spundfass.3mf, fass-200-liter-spund-und-deckelfass_n_spundfass.step, fass-200-liter-spund-und-deckelfass_n_deckelfass.stl, fass-200-liter-spund-und-deckelfass_n_deckelfass.3mf, fass-200-liter-spund-und-deckelfass_n_deckelfass.step, fass-200-liter-spund-und-deckelfass_n_palette_4_faesser.stl, fass-200-liter-spund-und-deckelfass_n_palette_4_faesser.3mf, fass-200-liter-spund-und-deckelfass_n_palette_4_faesser.step, fass-200-liter-spund-und-deckelfass_n_liegend_gestapelt.stl, fass-200-liter-spund-und-deckelfass_n_liegend_gestapelt.3mf, fass-200-liter-spund-und-deckelfass_n_liegend_gestapelt.step€1.50
TT (1:120)fass-200-liter-spund-und-deckelfass_tt_sammelplatte.stl, fass-200-liter-spund-und-deckelfass_tt_sammelplatte.3mf, fass-200-liter-spund-und-deckelfass_tt_sammelplatte.step, fass-200-liter-spund-und-deckelfass_tt_spundfass.stl, fass-200-liter-spund-und-deckelfass_tt_spundfass.3mf, fass-200-liter-spund-und-deckelfass_tt_spundfass.step, fass-200-liter-spund-und-deckelfass_tt_deckelfass.stl, fass-200-liter-spund-und-deckelfass_tt_deckelfass.3mf, fass-200-liter-spund-und-deckelfass_tt_deckelfass.step, fass-200-liter-spund-und-deckelfass_tt_palette_4_faesser.stl, fass-200-liter-spund-und-deckelfass_tt_palette_4_faesser.3mf, fass-200-liter-spund-und-deckelfass_tt_palette_4_faesser.step, fass-200-liter-spund-und-deckelfass_tt_liegend_gestapelt.stl, fass-200-liter-spund-und-deckelfass_tt_liegend_gestapelt.3mf, fass-200-liter-spund-und-deckelfass_tt_liegend_gestapelt.step€1.50
H0 (1:87)fass-200-liter-spund-und-deckelfass_h0_sammelplatte.stl, fass-200-liter-spund-und-deckelfass_h0_sammelplatte.3mf, fass-200-liter-spund-und-deckelfass_h0_sammelplatte.step, fass-200-liter-spund-und-deckelfass_h0_spundfass.stl, fass-200-liter-spund-und-deckelfass_h0_spundfass.3mf, fass-200-liter-spund-und-deckelfass_h0_spundfass.step, fass-200-liter-spund-und-deckelfass_h0_deckelfass.stl, fass-200-liter-spund-und-deckelfass_h0_deckelfass.3mf, fass-200-liter-spund-und-deckelfass_h0_deckelfass.step, fass-200-liter-spund-und-deckelfass_h0_palette_4_faesser.stl, fass-200-liter-spund-und-deckelfass_h0_palette_4_faesser.3mf, fass-200-liter-spund-und-deckelfass_h0_palette_4_faesser.step, fass-200-liter-spund-und-deckelfass_h0_liegend_gestapelt.stl, fass-200-liter-spund-und-deckelfass_h0_liegend_gestapelt.3mf, fass-200-liter-spund-und-deckelfass_h0_liegend_gestapelt.step€1.50

Printing

  1. Resin, 0.05 mm layers: tilt the single parts by about 30–45° in the resin slicer and add light supports, on undersides and backs rather than visible faces.
  2. After printing, wash the parts (cleaner as specified by the resin manufacturer), remove the supports and post-cure them fully under UV light.
  3. FDM (H0, TT): PLA, 0.2 mm nozzle, 0.08 mm layers, no supports, as the files are laid out.
  4. The lying stack has small overhangs under the upper drums; in FDM add supports if needed.

FAQ

Which material should I use for this model railway accessory?

Recommended: Resin (alternatively PLA). PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Resin or FDM?

Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Does the part carry current or work?

No. Nothing in this range carries current; detail parts are dummies.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 2.0.0, updated 5 November 2026 · SKU MB-DRUMS-200L

    More model railway accessories

    All model railway accessories