Grid box – Europool-type mesh box pallet, single and stacked, N, TT, H0

Description

Mesh box pallets stand in every goods shed and on every ramp. The box has the outer size of the Europool grid box and see-through mesh walls; two stacked boxes come as one part as well.

• Outer size from the data sheet: 1240 × 835 × 970 mm, inner height 800 mm.
• See-through mesh walls: meshes coarser than on the prototype so they stay printable.
• Single or stacked two high; no lettering or type plate.

In the set per scale:

• Grid box: outside 1240 × 835 × 970 mm, inside 1200 × 800 × 800 mm; N 7.75 × 5.22 × 6.06 mm, TT 10.33 × 6.96 × 8.08 mm, H0 14.25 × 9.6 × 11.15 mm
• One box and two stacked boxes as one part.

Scales: One variant per scale: N (resin only), TT (1:120) and H0 (1:87). There is no Z (bars and openings would be too small). Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).

Dimensions: Prototype dimensions from data sheet Europool grid box pallet (DIN 15155/8, UIC 435-3) and Rotom product sheet 75020, divided by the scale. The walls are thickened to 0.65 mm (prototype 20 mm), and the 4 mm wire mesh is replaced by openings of about 15 cm with 0.65 mm bars. Feet, floor, corner posts and mesh pitch are an estimate, not true to the prototype. How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge first to see in advance whether clearance and distances suit your setup.

Material: Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Dimensions

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Print orientation: Resin: tilted by about 30–45° on light supports. FDM: Standing, open side up.

Safety notice

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children. Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Uncured resin is an irritant: wear nitrile gloves, ventilate well, follow the resin manufacturer’s instructions and fully post-cure the parts.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

• STL – print-ready mesh
• 3MF – with print profile
• STEP – editable in CAD

Files per version

Version	Contains	Price
N (resin only)	gitterbox-palette_n_sammelplatte.stl, gitterbox-palette_n_sammelplatte.3mf, gitterbox-palette_n_sammelplatte.step, gitterbox-palette_n_gitterbox.stl, gitterbox-palette_n_gitterbox.3mf, gitterbox-palette_n_gitterbox.step, gitterbox-palette_n_gitterbox_2_gestapelt.stl, gitterbox-palette_n_gitterbox_2_gestapelt.3mf, gitterbox-palette_n_gitterbox_2_gestapelt.step	€1.50
TT (1:120)	gitterbox-palette_tt_sammelplatte.stl, gitterbox-palette_tt_sammelplatte.3mf, gitterbox-palette_tt_sammelplatte.step, gitterbox-palette_tt_gitterbox.stl, gitterbox-palette_tt_gitterbox.3mf, gitterbox-palette_tt_gitterbox.step, gitterbox-palette_tt_gitterbox_2_gestapelt.stl, gitterbox-palette_tt_gitterbox_2_gestapelt.3mf, gitterbox-palette_tt_gitterbox_2_gestapelt.step	€1.50
H0 (1:87)	gitterbox-palette_h0_sammelplatte.stl, gitterbox-palette_h0_sammelplatte.3mf, gitterbox-palette_h0_sammelplatte.step, gitterbox-palette_h0_gitterbox.stl, gitterbox-palette_h0_gitterbox.3mf, gitterbox-palette_h0_gitterbox.step, gitterbox-palette_h0_gitterbox_2_gestapelt.stl, gitterbox-palette_h0_gitterbox_2_gestapelt.3mf, gitterbox-palette_h0_gitterbox_2_gestapelt.step	€1.50

Printing

1. Resin, 0.05 mm layers: tilt the single parts by about 30–45° in the resin slicer and add light supports, on undersides and backs rather than visible faces.
2. After printing, wash the parts (cleaner as specified by the resin manufacturer), remove the supports and post-cure them fully under UV light.
3. FDM (H0, TT): PLA, 0.2 mm nozzle, 0.08 mm layers, no supports, as the files are laid out.

FAQ

Reviews

No reviews yet.

How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

Version 1.0.0, updated 5 November 2026 · SKU MB-MESH-BOX