Buffer stop set with placeholder track (no brand)

Model railway accessories

Buffer stop set – frame buffer stop and sleeper buffer stop, typical model railway style, N, TT, H0

Two buffer stops for track ends: frame buffer stop with buffers and sleeper buffer stop. Dimensions estimated, typical model railway style, not true to the prototype.

Choose a version
€1.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

Every dead-end track needs an end. The set contains a frame buffer stop with buffer beam, two buffers and diagonal struts, and a buffer stop made of stacked sleepers. Both stand freely at the track end and are not tied to any rail profile.

  • Frame buffer stop with two buffers at standard-gauge buffer spacing and 45° struts (prints without supports).
  • Sleeper buffer stop of stacked sleepers with a timber buffer beam.
  • Free-standing, suits any track; no lettering.

In the set per scale:

  • N: frame buffer stop 15 mm wide, beam top 8.1 mm, buffer spacing 10.9 mm; sleeper buffer stop 16.2 × 11.2 × 8.1 mm
  • TT: frame buffer stop 20 mm wide, beam top 10.8 mm, buffer spacing 14.6 mm; sleeper buffer stop 21.7 × 15 × 10.8 mm
  • H0: frame buffer stop 27.6 mm wide, beam top 14.9 mm, buffer spacing 20.1 mm; sleeper buffer stop 29.9 × 20.7 × 14.9 mm

Scales: One variant per scale: N (1:160), TT (1:120) and H0 (1:87). Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).

Dimensions: We found no prototype drawing for buffer stops. Width, height, length, buffer height and buffer spacing are chosen in typical model railway style and are therefore an estimate, not true to the prototype. How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge first to see in advance whether clearance and distances suit your setup. The foot of the part sits at rail-top level (height offset 0), so it is not tailored to any particular track system. If the rail top of your track sits higher than the baseboard, shim the part by that height.

Material: PLA is enough because the layout stays indoors; PETG works too. 0.4 mm nozzle, ideally 0.12 mm layers, no supports.

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Dimensions

Width28 mm
Height15 mm
Depth27 mm
Weight (printed)6 g
Layer height0.12 mm
Walls2
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Print orientation: Standing.

Safety notice

Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children. Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
N (1:160)prellbock-set-fest-und-schwellen_n_sammelplatte.stl, prellbock-set-fest-und-schwellen_n_sammelplatte.3mf, prellbock-set-fest-und-schwellen_n_sammelplatte.step, prellbock-set-fest-und-schwellen_n_festprellbock.stl, prellbock-set-fest-und-schwellen_n_festprellbock.3mf, prellbock-set-fest-und-schwellen_n_festprellbock.step, prellbock-set-fest-und-schwellen_n_schwellenprellbock.stl, prellbock-set-fest-und-schwellen_n_schwellenprellbock.3mf, prellbock-set-fest-und-schwellen_n_schwellenprellbock.step€1.90
TT (1:120)prellbock-set-fest-und-schwellen_tt_sammelplatte.stl, prellbock-set-fest-und-schwellen_tt_sammelplatte.3mf, prellbock-set-fest-und-schwellen_tt_sammelplatte.step, prellbock-set-fest-und-schwellen_tt_festprellbock.stl, prellbock-set-fest-und-schwellen_tt_festprellbock.3mf, prellbock-set-fest-und-schwellen_tt_festprellbock.step, prellbock-set-fest-und-schwellen_tt_schwellenprellbock.stl, prellbock-set-fest-und-schwellen_tt_schwellenprellbock.3mf, prellbock-set-fest-und-schwellen_tt_schwellenprellbock.step€1.90
H0 (1:87)prellbock-set-fest-und-schwellen_h0_sammelplatte.stl, prellbock-set-fest-und-schwellen_h0_sammelplatte.3mf, prellbock-set-fest-und-schwellen_h0_sammelplatte.step, prellbock-set-fest-und-schwellen_h0_festprellbock.stl, prellbock-set-fest-und-schwellen_h0_festprellbock.3mf, prellbock-set-fest-und-schwellen_h0_festprellbock.step, prellbock-set-fest-und-schwellen_h0_schwellenprellbock.stl, prellbock-set-fest-und-schwellen_h0_schwellenprellbock.3mf, prellbock-set-fest-und-schwellen_h0_schwellenprellbock.step€1.90

Printing

  1. PLA (or PETG), 0.4 mm nozzle, 0.12 mm layers, 2 walls, 15 % infill, no supports.
  2. Standing as installed.

FAQ

Which material should I use for this model railway accessory?

Recommended: PLA (alternatively PETG). PLA is enough for gauges and structural parts (0.4 mm nozzle). For small details use resin or a 0.2 mm nozzle. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Do the buffers match my vehicles?

The buffer height counts from the foot = rail top. If the buffer stop stands on the baseboard, the buffers sit lower by the height of your track; shim it in that case. Measure against a wagon first.

Does it suit my track?

The foot of the part sits at rail-top level (height offset 0), so it is not tailored to any particular track system. If the rail top of your track sits higher than the baseboard, shim the part by that height. Use the free check gauge to check clearance and edge distance in advance.

Does the part carry current or work?

No. Nothing in this range carries current; detail parts are dummies.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 5 November 2026 · SKU MB-BUFFER-STOPS

    More model railway accessories

    All model railway accessories