Hex key holder ISO 2936 to fit Systainer³ M and L – tiles for 1.5 to 10 mm, short and long

Description

Every key has its place: it lies flat in a V groove, sinks to its centre line and can be lifted out at the finger notch at the end of the long arm. The keys are arranged like a staircase, so no short arm crosses another key.

• Tile A (short): key size (length) 1.5 (46.5), 2 (52), 2.5 (58.5), 3 (66), 4 (74), 5 (85), 6 (96), 8 (108), 10 (122) mm to ISO 2936.
• Tile B (long, M only): 1.5 (63.5), 2 (77), 2.5 (87.5), 3 (93), 4 (104), 5 (120), 6 (141) mm; 8 and 10 mm long fit no tile, the long series does not fit the shorter L tile.
• DIN 911 keys too: the old standard is shorter, those keys lie in the same grooves.
• Flat: tile 30 mm high, fits every height from M 112.

Variants and installation: Whole set (all tiles and connector bars, print profile as below): Tile set M (short + long, 2 × each) 21 h 38 min, 411 g; Tile set L (short, 6 ×) 30 h 27 min, 575 g. Systainer³ M (from above, one long side at the front): front: left A (short), right B (long); back: left B (long), right A (short). The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall. Systainer³ L (from above, one long side at the front): front: left A (short), middle A (short), right A (short); back: left A (short), middle A (short), right A (short). The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall. Single tile: fits any of the 4 places in the Systainer³ M; R 15 corners towards the case wall, turned by 180° in the back row. Can be mixed with other tiles of the same size.

Dimensions: Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet. Systainer³ M: 2 × 2 tiles of 193.6 × 136.3 mm (inside 389.5 × 275 mm), 2 connector bars; Systainer³ L: 3 × 2 tiles of 166.3 × 136.4 mm (inside 501.5 × 275.2 mm), 3 connector bars. Tool dimensions according to ISO 2936:2014. Groove per size: corner dimension e (max.) plus 0.3 mm clearance, arm l + 1 mm. The corner radius, floor profile (floor cross, radius between floor and wall) and wall draft of the cases are not published. That is why we relieve generously: R 15 in the case corner, a 4 mm chamfer at the bottom edge, a hollow underside with a rim (a floor cross up to 5 mm high stays clear) and 1.0 mm clearance per side to the case, 0.3 mm between tiles. Print the free fit sample set first: it shows on your own case whether corner, floor edge and clearance work.

Material: PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Brands: Made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. No logos and no lettering on the parts.

Clearance 0.3 mm on the corner dimension; if the keys lie too deep, scale the tile 1–2 % up in the slicer (not just its height).

Dimensions

Dimensions of the default variant in print orientation.

Material and temperature

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Print orientation: Tiles upside down, top face on the bed; connector bars flat. No supports.

Safety notice

Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them. Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

• STL – print-ready mesh
• 3MF – with print profile
• STEP – editable in CAD

Files per version

Version	Contains	Price
Tile set M (short + long, 2 × each)	inbus-halter-iso-2936-kacheln_satz_m_kurz.stl, inbus-halter-iso-2936-kacheln_satz_m_kurz.3mf, inbus-halter-iso-2936-kacheln_satz_m_kurz.step, inbus-halter-iso-2936-kacheln_satz_m_lang.stl, inbus-halter-iso-2936-kacheln_satz_m_lang.3mf, inbus-halter-iso-2936-kacheln_satz_m_lang.step, inbus-halter-iso-2936-kacheln_satz_m_steckleiste.stl, inbus-halter-iso-2936-kacheln_satz_m_steckleiste.3mf, inbus-halter-iso-2936-kacheln_satz_m_steckleiste.step	€2.90
Tile set L (short, 6 ×)	inbus-halter-iso-2936-kacheln_satz_l_kurz.stl, inbus-halter-iso-2936-kacheln_satz_l_kurz.3mf, inbus-halter-iso-2936-kacheln_satz_l_kurz.step, inbus-halter-iso-2936-kacheln_satz_l_steckleiste.stl, inbus-halter-iso-2936-kacheln_satz_l_steckleiste.3mf, inbus-halter-iso-2936-kacheln_satz_l_steckleiste.step	€2.90
Single tile M (short)	inbus-halter-iso-2936-kacheln_einzel_m_kurz.stl, inbus-halter-iso-2936-kacheln_einzel_m_kurz.3mf, inbus-halter-iso-2936-kacheln_einzel_m_kurz.step, inbus-halter-iso-2936-kacheln_einzel_m_steckleiste.stl, inbus-halter-iso-2936-kacheln_einzel_m_steckleiste.3mf, inbus-halter-iso-2936-kacheln_einzel_m_steckleiste.step	€2.90

You will also need

• 3 × Connector bar (printed, included)

Printing

1. PETG (or PLA), 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 % gyroid, no supports.
2. Print one tile first and try it in the case, then the rest of the set.

Installation

1. Put the tiles in with the R 15 corners towards the case wall, the back row turned by 180°.
2. At the joint between the front and the back row, lay one connector bar per column into the two half pockets.

FAQ

Reviews

No reviews yet.

How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

Version 3.0.0, updated 5 November 2026 · SKU F2-SY-INBUS