Drill bit cassette Ø 1–13 mm to DIN 338 to fit Systainer³ M and L in a placeholder case (grey box with the inside dimensions, no brand)

Tool case inserts

Drill bit cassette Ø 1–13 mm to DIN 338 to fit Systainer³ M and L – tiles, drills lying flat

Twist drills Ø 1 to 13 mm lie sorted by size in V grooves, half sunk, with a finger notch at the shank.

Choose a version
€3.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

Every drill has its groove, on the M tile sorted from large at the case wall to small inside. The drills lie flat and sink to their centre line; lift them out at the finger notch at the shank end. Lying flat, the cassette fits every case height, even the 151 mm long 13 mm drill.

  • Tile A: Ø 1, 2, 3, 4, 5, 6, 7 and 8 mm. Tile B: Ø 9, 10, 11, 12 and 13 mm.
  • Groove per size: diameter + 0.4 mm clearance, length = DIN 338 overall length + 2 mm.
  • Flat: tile 30 mm high, fits every height from M 112.

Variants and installation: Whole set (all tiles and connector bars, print profile as below): Tile set M (A + B, 2 × each) 20 h 54 min, 411 g; Tile set L (A + B, 3 × each) 28 h 15 min, 553 g. Systainer³ M (from above, one long side at the front): front: left A (Ø 1–8), right B (Ø 9–13); back: left B (Ø 9–13), right A (Ø 1–8). The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall. Systainer³ L (from above, one long side at the front): front: left A (Ø 1–8), middle B (Ø 9–13), right A (Ø 1–8); back: left B (Ø 9–13), middle A (Ø 1–8), right B (Ø 9–13). The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall. Single set M: one tile A and one B, so each size once; the other places stay free for other tiles.

Dimensions: Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet. Systainer³ M: 2 × 2 tiles of 193.6 × 136.3 mm (inside 389.5 × 275 mm), 2 connector bars; Systainer³ L: 3 × 2 tiles of 166.3 × 136.4 mm (inside 501.5 × 275.2 mm), 3 connector bars. Tool dimensions according to DIN 338 (catalogue values). The overall lengths for Ø 1, 7, 9, 10, 11 mm are derived from the standard series (estimate); the groove has 2 mm reserve. The corner radius, floor profile (floor cross, radius between floor and wall) and wall draft of the cases are not published. That is why we relieve generously: R 15 in the case corner, a 4 mm chamfer at the bottom edge, a hollow underside with a rim (a floor cross up to 5 mm high stays clear) and 1.0 mm clearance per side to the case, 0.3 mm between tiles. Print the free fit sample set first: it shows on your own case whether corner, floor edge and clearance work.

Material: PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Brands: Made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. No logos and no lettering on the parts.

If a drill is longer than its groove, scale the tile up by 1–2 % along X.

Dimensions

Width194 mm
Height30 mm
Depth136 mm
Weight (printed)206 g
Layer height0.2 mm
Walls3
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Print orientation: Tiles upside down, top face on the bed; connector bars flat. No supports.

Safety notice

Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them. Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
Tile set M (A + B, 2 × each)bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_a.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_a.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_a.step, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_b.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_b.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_b.step, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_steckleiste.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_steckleiste.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_m_steckleiste.step€3.90
Tile set L (A + B, 3 × each)bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_a.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_a.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_a.step, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_b.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_b.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_b.step, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_steckleiste.stl, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_steckleiste.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_satz_l_steckleiste.step€3.90
Single set M (1 × A and B: Ø 1–13 once)bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_a.stl, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_a.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_a.step, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_b.stl, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_b.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_b.step, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_steckleiste.stl, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_steckleiste.3mf, bohrer-kassette-1-13-mm-din-338-kacheln_einzel_m_steckleiste.step€3.90

You will also need

  • 3 × Connector bar (printed, included)

Printing

  1. PETG (or PLA), 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 % gyroid, no supports.
  2. Print one tile first and try it in the case, then the rest of the set.

Installation

  1. Put the tiles in with the R 15 corners towards the case wall, the back row turned by 180°.
  2. At the joint between the front and the back row, lay one connector bar per column into the two half pockets.

FAQ

Which material should I use for this tool case insert?

Recommended: PETG (alternatively PLA). PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed the part and tested it in a case?

Not yet. Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet; the tool dimensions come from the standards named. That is why you should print the free fit sample set and a single tile first.

What are the connector bars for?

A flat bar (30 × 5 × 2 mm) sits in two pockets at the joint between the front and the back tile and keeps them in line without clamping. Lengthwise the case walls hold the tiles. You can also leave the bars out.

Is this an accessory by TANOS or Festool?

No. The parts are made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. We name products only to describe the fit.

Which material?

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 2.0.0, updated 5 November 2026 · SKU F2-SY-BOHRER

    More tool case inserts

    All tool case inserts