Drawer insert to fit Sortainer³ and Combi in a placeholder case (grey box with the inside dimensions, no brand)

Tool case inserts

Drawer insert to fit Sortainer³ and Combi – tiles with 16 or 32 compartments per drawer

Four tiles fill one drawer (343 × 271 mm inside): fixed compartments for screws and small parts, also for the high drawer.

Choose a version
€2.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

For the drawers of Sortainer/2, Sortainer/3 and Combi M: four tiles per drawer, each with 4 or 8 fixed compartments. The trays stand in base rings with a rim, as in the cases.

  • Low drawer (Sortainer/2 lower, Sortainer/3, Combi): 343 × 271 × 66 mm inside; compartments 83 × 62 mm (4 per tile) or 41 × 62 mm (8 per tile).
  • High drawer (Sortainer/2): 343 × 261 × 158 mm inside, its own tiles (10 mm narrower).
  • 50 mm high: 16 mm of air remain in the low drawer.

Variants and installation: One tile set per drawer and compartment layout (all four places identical). Sortainer³ / Combi drawer (low) (from above, handle side of the drawer at the front): front: left 4 compartments, right 4 compartments; back: left 4 compartments, right 4 compartments. The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall.

Two parts per tile: tray and base ring. The tray stands loose in the ring; the ring carries the rim, the chamfer and the R 15 corners and keeps the tray floor 5.5 mm above the case floor. A floor over a hollow underside could not be printed in one piece without supports.

Dimensions: Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet. Sortainer³ / Combi drawer (low): 2 × 2 tiles of 170.3 × 134.3 mm (inside 343 × 271 mm), 2 connector bars; Sortainer/2, high drawer: 2 × 2 tiles of 170.3 × 129.3 mm (inside 343 × 261 mm), 2 connector bars. The corner radius, floor profile (floor cross, radius between floor and wall) and wall draft of the cases are not published. That is why we relieve generously: R 15 in the case corner, a 4 mm chamfer at the bottom edge, a hollow underside with a rim (a floor cross up to 5 mm high stays clear) and 1.0 mm clearance per side to the case, 0.3 mm between tiles. Print the free fit sample set first: it shows on your own case whether corner, floor edge and clearance work.

Material: PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Brands: Made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. No logos and no lettering on the parts.

If a tile jams in the drawer, scale tray and base ring down by 0.5 % in X and Y.

Dimensions

Width166 mm
Height44 mm
Depth130 mm
Weight (printed)579 g
Layer height0.2 mm
Walls3
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Print orientation: Tray with its floor on the bed, base ring and connector bars flat. No supports.

Safety notice

Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them. Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
low drawer, 4 compartments per tileschubladen-einsatz-sortainer-kacheln_n4_4_schale.stl, schubladen-einsatz-sortainer-kacheln_n4_4_schale.3mf, schubladen-einsatz-sortainer-kacheln_n4_4_schale.step, schubladen-einsatz-sortainer-kacheln_n4_sockelrahmen.stl, schubladen-einsatz-sortainer-kacheln_n4_sockelrahmen.3mf, schubladen-einsatz-sortainer-kacheln_n4_sockelrahmen.step, schubladen-einsatz-sortainer-kacheln_n4_steckleiste.stl, schubladen-einsatz-sortainer-kacheln_n4_steckleiste.3mf, schubladen-einsatz-sortainer-kacheln_n4_steckleiste.step€2.90
low drawer, 8 compartments per tileschubladen-einsatz-sortainer-kacheln_n8_8_schale.stl, schubladen-einsatz-sortainer-kacheln_n8_8_schale.3mf, schubladen-einsatz-sortainer-kacheln_n8_8_schale.step, schubladen-einsatz-sortainer-kacheln_n8_sockelrahmen.stl, schubladen-einsatz-sortainer-kacheln_n8_sockelrahmen.3mf, schubladen-einsatz-sortainer-kacheln_n8_sockelrahmen.step, schubladen-einsatz-sortainer-kacheln_n8_steckleiste.stl, schubladen-einsatz-sortainer-kacheln_n8_steckleiste.3mf, schubladen-einsatz-sortainer-kacheln_n8_steckleiste.step€2.90
high drawer, 4 compartments per tileschubladen-einsatz-sortainer-kacheln_h4_4_schale.stl, schubladen-einsatz-sortainer-kacheln_h4_4_schale.3mf, schubladen-einsatz-sortainer-kacheln_h4_4_schale.step, schubladen-einsatz-sortainer-kacheln_h4_sockelrahmen.stl, schubladen-einsatz-sortainer-kacheln_h4_sockelrahmen.3mf, schubladen-einsatz-sortainer-kacheln_h4_sockelrahmen.step, schubladen-einsatz-sortainer-kacheln_h4_steckleiste.stl, schubladen-einsatz-sortainer-kacheln_h4_steckleiste.3mf, schubladen-einsatz-sortainer-kacheln_h4_steckleiste.step€2.90
high drawer, 8 compartments per tileschubladen-einsatz-sortainer-kacheln_h8_8_schale.stl, schubladen-einsatz-sortainer-kacheln_h8_8_schale.3mf, schubladen-einsatz-sortainer-kacheln_h8_8_schale.step, schubladen-einsatz-sortainer-kacheln_h8_sockelrahmen.stl, schubladen-einsatz-sortainer-kacheln_h8_sockelrahmen.3mf, schubladen-einsatz-sortainer-kacheln_h8_sockelrahmen.step, schubladen-einsatz-sortainer-kacheln_h8_steckleiste.stl, schubladen-einsatz-sortainer-kacheln_h8_steckleiste.3mf, schubladen-einsatz-sortainer-kacheln_h8_steckleiste.step€2.90

You will also need

  • 2 × Connector bar (printed, included)

Printing

  1. PETG (or PLA), 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 % gyroid, no supports.
  2. Print one tile first and try it in the case, then the rest of the set.

Installation

  1. For each tile, put the base ring into the case and set the tray into it.
  2. Put the tiles in with the R 15 corners towards the case wall, the back row turned by 180°.
  3. At the joint between the front and the back row, lay one connector bar per column into the two half pockets.

FAQ

Which material should I use for this tool case insert?

Recommended: PETG (alternatively PLA). PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed the part and tested it in a case?

Not yet. Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet; the tool dimensions come from the standards named. That is why you should print the free fit sample set and a single tile first.

What are the connector bars for?

A flat bar (30 × 5 × 2 mm) sits in two pockets at the joint between the front and the back tile and keeps them in line without clamping. Lengthwise the case walls hold the tiles. You can also leave the bars out.

Is this an accessory by TANOS or Festool?

No. The parts are made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. We name products only to describe the fit.

Which material?

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 2.0.0, updated 5 November 2026 · SKU F2-SY-SCHUBLADE

    More tool case inserts

    All tool case inserts