Die holder M3–M20 to DIN EN 22568 to fit Systainer³ M and L: tile A and B side by side, with placeholder dies (without the case)

Tool case inserts

Die holder M3–M20 to DIN EN 22568 to fit Systainer³ M and L – tiles, fine and pipe thread separate

Round dies lie flat in pockets sized to their outer dimensions, two stacked up to M8; a finger notch at every pocket.

Choose a version
€2.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

Every die has its pocket sized to the outer diameter and thickness of the standard, sorted from small at the case wall to large. The dies rest on a narrow ring with the pocket open below, so chips fall through. Lift the top die out at the finger notch. Tile A takes coarse thread, tile B fine and pipe thread.

  • Tile A, coarse thread (outer Ø × thickness in mm): M3 20 × 5, M4 20 × 5, M5 20 × 7, M6 20 × 7, M8 25 × 9, M10 30 × 11, M12 38 × 14, M14 38 × 14, M16 45 × 18, M18 45 × 18, M20 45 × 18. Up to M8 two dies fit on top of each other, e.g. coarse and fine thread with the same outer diameter.
  • Tile B, fine and pipe thread (stack pockets per outer size): 20 × 5 (3 dies: M4 × 0.5, M5 × 0.5); 20 × 7 (2 dies: M6 × 0.75); 25 × 9 (2 dies: M8 × 0.75, M8 × 1); 30 × 11 (3 pockets: M10 × 1, M10 × 1.25, G 1/8); 38 × 10 (2 pockets: M12 × 1.25 to M14 × 1.5, G 1/4); 45 × 14 (2 pockets: M16 × 1.5 to M20 × 1.5, G 3/8, G 1/2).
  • Pocket: outer Ø + 0.5 mm, as deep as the dies plus 0.5 mm, ring 3 mm, finger notch 12 mm wide.
  • Flat: tile 30 mm high, the dies lie below the top face, fits every height from M 112.
  • Careful: Dies have sharp cutting edges in the bore: hold them by the outer rim.
  • Print one at a time, as needed: A and B are holders of their own, for M and L.

Variants and installation: Single tile: fits any of the 4 places in the Systainer³ M; R 15 corners towards the case wall, turned by 180° in the back row. Can be mixed with other tiles of the same size. Single tile: fits any of the 6 places in the Systainer³ L; R 15 corners towards the case wall, turned by 180° in the back row. Can be mixed with other tiles of the same size.

Dimensions: Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet. Systainer³ M: 2 × 2 tiles of 193.6 × 136.3 mm (inside 389.5 × 275 mm), 2 connector bars; Systainer³ L: 3 × 2 tiles of 166.3 × 136.4 mm (inside 501.5 × 275.2 mm), 3 connector bars. Tool dimensions according to DIN EN 22568 and EN 22568 (second catalogue). Outer Ø × thickness to DIN EN 22568 (formerly DIN 223) taken from two manufacturer catalogues that agree (standard text not read); G pipe thread to DIN EN 24231 from the same catalogue. For M12 one dealer gives 38.1 × 13 instead of 38 × 14; the pocket is made for 14 mm. The 0.5 mm clearance is an estimate. The corner radius, floor profile (floor cross, radius between floor and wall) and wall draft of the cases are not published. That is why we relieve generously: R 15 in the case corner, a 4 mm chamfer at the bottom edge, a hollow underside with a rim (a floor cross up to 5 mm high stays clear) and 1.0 mm clearance per side to the case, 0.3 mm between tiles. Print the free fit sample set first: it shows on your own case whether corner, floor edge and clearance work.

Material: PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Brands: Made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. No logos and no lettering on the parts.

If a die is too tight, scale the tile up by 1 % in the slicer.

Dimensions

Width194 mm
Height30 mm
Depth136 mm
Weight (printed)133 g
Layer height0.2 mm
Walls3
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Print orientation: Tiles upside down, top face on the bed; connector bars flat. No supports.

Safety notice

Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them. Dies have sharp cutting edges in the bore: hold them by the outer rim. Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
Single tile M A (coarse thread M3–M20)schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_a.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_a.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_a.step, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_steckleiste.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_steckleiste.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_m_steckleiste.step€2.90
Single tile M B (fine and pipe thread)schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_b.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_b.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_b.step, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_steckleiste.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_steckleiste.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_m_steckleiste.step€2.90
Single tile L A (coarse thread M3–M20)schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_a.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_a.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_a.step, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_steckleiste.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_steckleiste.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_a_l_steckleiste.step€2.90
Single tile L B (fine and pipe thread)schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_b.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_b.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_b.step, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_steckleiste.stl, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_steckleiste.3mf, schneideisen-halter-m3-m20-din-en-22568-kacheln_einzel_b_l_steckleiste.step€2.90

You will also need

  • 3 × Connector bar (printed, included)

Printing

  1. PETG (or PLA), 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 % gyroid, no supports.
  2. Print one tile first and try it in the case, then the rest of the set.

Installation

  1. Put the tiles in with the R 15 corners towards the case wall, the back row turned by 180°.
  2. At the joint between the front and the back row, lay one connector bar per column into the two half pockets.

FAQ

Which material should I use for this tool case insert?

Recommended: PETG (alternatively PLA). PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Is there a slot for the die stock?

No. We found no documented length for die stocks, and there is no room for a long slot beside the pockets.

Have you printed the part and tested it in a case?

Not yet. Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet; the tool dimensions come from the standards named. That is why you should print the free fit sample set and a single tile first.

What are the connector bars for?

A flat bar (30 × 5 × 2 mm) sits in two pockets at the joint between the front and the back tile and keeps them in line without clamping. Lengthwise the case walls hold the tiles. You can also leave the bars out.

Is this an accessory by TANOS or Festool?

No. The parts are made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. We name products only to describe the fit.

Which material?

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 5 November 2026 · SKU F2-SY-SCHNEIDEISEN

    More tool case inserts

    All tool case inserts