Abrasive compartments to fit Systainer³ M and L in a placeholder case (grey box with the inside dimensions, no brand)

Tool case inserts

Abrasive compartments to fit Systainer³ M and L – Ø 125, Ø 150, 80 × 133 mm and Delta

Sanding discs and sheets lie flat in a stack, one compartment per tile in the format plus one for accessories.

Choose a version
€2.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

One compartment per grit: every tile takes a stack in your sander's format. Ø 150 is larger than a tile; there, two opposite tiles form the round compartment together.

  • Formats: Ø 125 (one per tile), Ø 150 (one per two tiles), 80 × 133 mm and Delta 100 × 150 mm (one per tile each); compartment = format + 2 mm.
  • Stack height 37.7 mm, tile 45 mm high, fits every height from M 112.
  • Accessory compartment next to each stack (Ø 125, sheets, Delta), e.g. for pads or fleece.
  • No connector bars: the trays stand in their base rings; the case walls hold them.

Variants and installation: One tile set per format for M and for L (all places identical). Systainer³ M (from above, one long side at the front): front: left Ø 125, right Ø 125; back: left Ø 125, right Ø 125. The back row is the same file turned by 180°; the two R 15 corners of every tile face the case wall. With Ø 150 the front and back tile of the same column form one compartment together.

Two parts per tile: tray and base ring. The tray stands loose in the ring; the ring carries the rim, the chamfer and the R 15 corners and keeps the tray floor 5.5 mm above the case floor. A floor over a hollow underside could not be printed in one piece without supports.

Dimensions: Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet. Systainer³ M: 2 × 2 tiles of 193.6 × 136.3 mm (inside 389.5 × 275 mm), 2 connector bars; Systainer³ L: 3 × 2 tiles of 166.3 × 136.4 mm (inside 501.5 × 275.2 mm), 3 connector bars. The formats come from the TANOS price list (abrasive inlays) and are nominal sizes of the abrasives. The corner radius, floor profile (floor cross, radius between floor and wall) and wall draft of the cases are not published. That is why we relieve generously: R 15 in the case corner, a 4 mm chamfer at the bottom edge, a hollow underside with a rim (a floor cross up to 5 mm high stays clear) and 1.0 mm clearance per side to the case, 0.3 mm between tiles. Print the free fit sample set first: it shows on your own case whether corner, floor edge and clearance work.

Material: PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Brands: Made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. No logos and no lettering on the parts.

If a stack is too tight, scale the tray up by 1 % in X and Y in the slicer.

Dimensions

Width189 mm
Height40 mm
Depth132 mm
Weight (printed)651 g
Layer height0.2 mm
Walls3
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Print orientation: Tray with its floor on the bed, base ring and connector bars flat. No supports.

Safety notice

Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them. Organiser insert, nothing load-bearing. Made to fit Systainer³ and Sortainer³ (inside dimensions per the manufacturer's price list); not an accessory of TANOS or Festool, no affiliation with them.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
Ø 125, tile set Mschleifmittel-faecher-125-150-delta-kacheln_d125_m_d125_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_d125_m_d125_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_d125_m_d125_schale.step, schleifmittel-faecher-125-150-delta-kacheln_d125_m_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_d125_m_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_d125_m_sockelrahmen.step€2.90
Ø 125, tile set Lschleifmittel-faecher-125-150-delta-kacheln_d125_l_d125_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_d125_l_d125_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_d125_l_d125_schale.step, schleifmittel-faecher-125-150-delta-kacheln_d125_l_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_d125_l_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_d125_l_sockelrahmen.step€2.90
Ø 150 (half), tile set Mschleifmittel-faecher-125-150-delta-kacheln_d150_m_d150_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_d150_m_d150_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_d150_m_d150_schale.step, schleifmittel-faecher-125-150-delta-kacheln_d150_m_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_d150_m_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_d150_m_sockelrahmen.step€2.90
Ø 150 (half), tile set Lschleifmittel-faecher-125-150-delta-kacheln_d150_l_d150_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_d150_l_d150_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_d150_l_d150_schale.step, schleifmittel-faecher-125-150-delta-kacheln_d150_l_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_d150_l_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_d150_l_sockelrahmen.step€2.90
80 × 133, tile set Mschleifmittel-faecher-125-150-delta-kacheln_r80x133_m_r80x133_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_r80x133_m_r80x133_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_r80x133_m_r80x133_schale.step, schleifmittel-faecher-125-150-delta-kacheln_r80x133_m_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_r80x133_m_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_r80x133_m_sockelrahmen.step€2.90
80 × 133, tile set Lschleifmittel-faecher-125-150-delta-kacheln_r80x133_l_r80x133_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_r80x133_l_r80x133_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_r80x133_l_r80x133_schale.step, schleifmittel-faecher-125-150-delta-kacheln_r80x133_l_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_r80x133_l_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_r80x133_l_sockelrahmen.step€2.90
Delta 100 × 150, tile set Mschleifmittel-faecher-125-150-delta-kacheln_delta_m_delta_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_delta_m_delta_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_delta_m_delta_schale.step, schleifmittel-faecher-125-150-delta-kacheln_delta_m_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_delta_m_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_delta_m_sockelrahmen.step€2.90
Delta 100 × 150, tile set Lschleifmittel-faecher-125-150-delta-kacheln_delta_l_delta_schale.stl, schleifmittel-faecher-125-150-delta-kacheln_delta_l_delta_schale.3mf, schleifmittel-faecher-125-150-delta-kacheln_delta_l_delta_schale.step, schleifmittel-faecher-125-150-delta-kacheln_delta_l_sockelrahmen.stl, schleifmittel-faecher-125-150-delta-kacheln_delta_l_sockelrahmen.3mf, schleifmittel-faecher-125-150-delta-kacheln_delta_l_sockelrahmen.step€2.90

Printing

  1. PETG (or PLA), 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 % gyroid, no supports.
  2. Print one tile first and try it in the case, then the rest of the set.

Installation

  1. For each tile, put the base ring into the case and set the tray into it.
  2. Put the tiles in with the R 15 corners towards the case wall, the back row turned by 180°.

FAQ

Which material should I use for this tool case insert?

Recommended: PETG (alternatively PLA). PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed the part and tested it in a case?

Not yet. Inside dimensions taken from the TANOS price list 2026; our part has not been tested in the case yet; the tool dimensions come from the standards named. That is why you should print the free fit sample set and a single tile first.

Is this an accessory by TANOS or Festool?

No. The parts are made to fit Systainer³/Sortainer³, not an accessory by TANOS or Festool, no affiliation with them. We name products only to describe the fit.

Which material?

PETG recommended, because a tool case quickly ends up in a car or in the sun. PLA works too, but it deforms in a hot car or in the sun.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 5 November 2026 · SKU F2-SY-SCHLEIF

    More tool case inserts

    All tool case inserts