Textured bases cobblestone and ruin

Tabletop accessories

Textured bases cobblestone and ruin – round, square, rectangular, 3 variations per size

Our own bases with a cobblestone and ruin texture: only the top is patterned, bevel and rim stay smooth; 3 variations per size. Meant for resin.

Choose a version
€2.49incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

Old paving with missing and sunken stones and a few pieces of rubble: ready-textured bases that you only need to prime and paint.

  • Pattern: irregular paving stones of about 5 mm with joints 0.6 mm wide and 0.5 mm deep; about every tenth stone is missing, some have sunk, plus one to three pieces of rubble.
  • Only the top is patterned: bevel and a narrow rim stay smooth; the stones end at the nominal height, only rubble rises up to about 0.5 mm above it.
  • 3 variations per size (files _a, _b, _c), so a unit does not look repetitive. Procedurally generated, our own geometry, no template.
  • Sizes: round 25 / 28.5 / 32 / 40 / 50 / 60 mm, square 20 / 25 / 30 / 40 / 50 mm, rectangular 25 × 50 and 30 × 60 mm. Foot as on our plain bases, they fit our trays.

In the set: Every shape and size (round, square, rectangular), every size in 3 variations as separate files. The stated print time, resin amount, dimensions and weight refer to one 25 mm round base only, not to the whole set.

Dimensions: Basis: nominal sizes of common plastic bases (retailer tables), foot sizes from a public measuring template. The foot of our bases is exactly the nominal size (top 2.0 mm smaller, height 3.5 mm, at 60 mm 4.0 mm), as on the plain bases. They are solid so that they also print on FDM without supports. Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). Height and bevel are our own choice based on seller figures of 3 to 5 mm height, not measured on real bases (estimate). Our part has not been printed or tested yet. Print the free fit test set first: it shows with your own bases and printer which clearance fits.

Material: Resin recommended, the texture is fine; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. Alternatively FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Made by base size, not for a particular game; no miniatures included.

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Dimensions

Width25 mm
Height4 mm
Depth25 mm
Weight (printed)2 g
Layer height0.05 mm

Dimensions and weight refer to one 25 mm round base in print orientation, not to the whole set.

Material and temperature

Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Print orientation: Resin: tilted by about 30–45° on light supports. FDM: foot down.

Safety notice

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing. Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Uncured resin is an irritant: wear nitrile gloves, ventilate well, follow the resin manufacturer’s instructions and fully post-cure the parts.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD

Printing

  1. Resin, 0.05 mm layers: tilt the bases by about 30–45° in the resin slicer, texture up, light supports on the underside only.
  2. After printing, wash the parts (cleaner as specified by the resin manufacturer), remove the supports and post-cure them fully under UV light.
  3. FDM: PLA, 0.2 mm nozzle, 0.08 mm layers, foot down, no supports.

FAQ

Which material should I use for this tabletop accessory?

Recommended: Resin (alternatively PLA). Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed and tested the part?

Not yet. Our part has not been printed or tested yet. That is why you should print the free fit test set first and then a single part.

Resin or FDM?

Resin recommended, the texture is fine; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. Alternatively FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.

Is this for a particular game?

No. We build by base size and name no games or makers. Which base size and which formation you need is in your rules.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 6 November 2026 · SKU F2-TT-TEX-COBBLE

    More tabletop accessories

    All tabletop accessories