Flight bases, round and oval, with socket

Tabletop accessories

Flight bases, round and oval, with socket – for printed Ø 6 mm rods and 3 mm rods from the shop, with head adapter

Our own flight bases, round 32, 40, 60 and oval 75 × 42, 120 × 92 mm, with a socket, both hole sizes in the set: for printed Ø 6 mm rods (five lengths included) and for 3 mm rods from the shop (not included).

Choose a version
€1.49incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

For flyers and anything that should hover over the table: print the base, plug in the rod, glue the head adapter under the model. Both versions are in the set: for the rod from the printer and for a 3 mm brass or acrylic rod from the shop.

  • Bases round 32 / 40 / 60 mm, oval 75 × 42 and 120 × 92 mm: solid, with a bevelled edge, socket 6 mm above the top face.
  • Printed rods Ø 6 mm, 40, 60, 80, 100 and 127 mm long, D profile, printed lying (the layers run lengthwise, the strong direction). Hole in base and head adapter Ø 6.2 mm.
  • Rods from the shop: 3 mm brass or acrylic rod separately, not included. Hole Ø 3.2 mm, which also suits 1/8 inch (3.175 mm).
  • Head adapter Ø 16 mm to glue under the model, the rod plugs in from below. No ball joint.
  • Long rods on large bases: 127 mm belongs on the 120 × 92 mm oval. We state no load rating; meant for light models.

In the set: Both hole sizes: for printed rods five bases with Ø 6.2 mm hole, five rods and a head adapter; for rods from the shop five bases with Ø 3.2 mm hole and a head adapter. The stated print time, filament amount and weight refer to one 32 mm round base, one 60 mm rod and one head adapter only, the dimensions to the base only; not to the whole set.

Dimensions: Basis: nominal sizes of common plastic bases (retailer tables), foot sizes from a public measuring template. Bases to the nominal size; hole Ø 6.2 mm for our Ø 6 mm rods and Ø 3.2 mm for 3 mm or 1/8 inch rods. Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). The 3 mm rod as the most common value on the market and the hole sizes are our assumption, because hole sizes of flight bases are not published; the hole bar in the test set shows your hole size (estimate). Our part has not been printed or tested yet. Print the free fit test set first: it shows with your own bases and printer which clearance fits.

Material: PLA, 0.4 mm nozzle, ideally 0.12 mm layers, no supports; PETG works too. PLA deforms in a hot car, so do not leave the parts there.

Made by base size, not for a particular game; no miniatures included.

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Dimensions

Width32 mm
Height10 mm
Depth32 mm
Weight (printed)4 g
Layer height0.12 mm
Walls2
Infill15 %

Dimensions of one 32 mm round flight base in print orientation; the weight refers to base, 60 mm rod and head adapter. Not of the whole set.

Material and temperature

Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Print orientation: Bases with the foot on the bed, rods lying, head adapter with the disc on the bed; no supports.

Safety notice

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing. Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD

Printing

  1. PLA (or PETG), 0.4 mm nozzle, 0.12 mm layers, 2 walls, 15 % infill, no supports.
  2. Bases with the foot on the bed, rods lying on their flat side, head adapter with the disc on the bed.

Installation

  1. Plug the rod into the socket, put the head adapter on the rod and glue it under the model. If the rod sits too loose, a drop of glue.

FAQ

Which material should I use for this tabletop accessory?

Recommended: PLA (alternatively PETG). Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Which hole suits my rod?

For 3 mm and 1/8 inch the bases with Ø 3.2 mm, for our printed rods those with Ø 6.2 mm. Holes turn out a little tighter depending on the printer; the hole bar in the free test set shows that.

Have you printed and tested the part?

Not yet. Our part has not been printed or tested yet. That is why you should print the free fit test set first and then a single part.

Is this for a particular game?

No. We build by base size and name no games or makers. Which base size and which formation you need is in your rules.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 6 November 2026 · SKU F2-TT-FLIGHT

    More tabletop accessories

    All tabletop accessories