Plain base set

Tabletop accessories

Plain base set – round 25–160, square 20–50, rectangular 25×50 to 60×100 mm

Our own plain bases in the common nominal sizes, with a bevelled edge, every size as its own file. From 60 mm with a hollow underside that saves material.

Choose a version
€1.49incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

Bases to print yourself, when you are short of some or want to rebase miniatures. They have the nominal sizes our trays are built around.

  • Round 25 / 28.5 / 32 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 130 / 160 mm.
  • Square 20 / 25 / 30 / 40 / 50 mm; rectangular 25 × 50, 30 × 60, 40 × 60, 50 × 75, 50 × 100 and 60 × 100 mm.
  • Shape: foot = nominal size, top 2.0 mm smaller (from 80 mm 3.0 mm), height 3.5 mm up to 50 mm, 4.0 mm up to 100 mm, above that 5.0 mm.
  • Hollow underside above 50 mm (wall at least 1.6 mm, 2.0 mm deep): print these sizes with the top face on the bed, as the file is laid out, no supports.

In the set: Every shape and size (round, square, rectangular), every size as its own file. Print what you need and set the quantity in the slicer. The stated print time, filament amount, dimensions and weight refer to one 25 mm round base only, not to the whole set.

Dimensions: Basis: nominal sizes of common plastic bases (retailer tables), foot sizes from a public measuring template. The foot of our bases is exactly the nominal size, so they fit our trays (recess nominal + 0.4 mm). Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). Height and bevel are our own choice based on seller figures of 3 to 5 mm height, not measured on real bases; at 60 mm round the one measured value of 63.6 mm is an outlier (estimate). Our part has not been printed or tested yet. Print the free fit test set first: it shows with your own bases and printer which clearance fits.

Material: PLA, 0.4 mm nozzle, ideally 0.12 mm layers, no supports; PETG works too. PLA deforms in a hot car, so do not leave the parts there.

Made by base size, not for a particular game; no miniatures included.

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Dimensions

Width25 mm
Height4 mm
Depth25 mm
Weight (printed)1 g
Layer height0.12 mm
Walls2
Infill15 %

Dimensions and weight refer to one 25 mm round base in print orientation, not to the whole set.

Material and temperature

Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Print orientation: Up to 50 mm with the foot on the bed; larger bases with the top face on the bed, as the files are laid out. No supports.

Safety notice

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing. Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD

Printing

  1. PLA (or PETG), 0.4 mm nozzle, 0.12 mm layers, 2 walls, 15 % infill, no supports.

FAQ

Which material should I use for this tabletop accessory?

Recommended: PLA (alternatively PETG). Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed and tested the part?

Not yet. Our part has not been printed or tested yet. That is why you should print the free fit test set first and then a single part.

Is this for a particular game?

No. We build by base size and name no games or makers. Which base size and which formation you need is in your rules.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 6 November 2026 · SKU F2-TT-BASES-PLAIN

    More tabletop accessories

    All tabletop accessories