Skirmish trays for 25 mm round bases with placeholder bases (our own plain bases, no miniatures)

Tabletop accessories

Skirmish trays for 25 mm round bases – rows and staggered, plus the 25 mm grid, single pockets

Trays with single pockets Ø 25.4 mm (nominal + 0.4) and 1.6 mm webs: rows 3–5 × 1–2 and staggered (honeycomb); plus rank & flank trays on the 25 mm grid, base to base.

Choose a version
€2.49incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

For squads on 25 mm round bases: every base sits in its own pocket and you move the group across the table in one go. The webs between the pockets are only 1.6 mm wide so the group stands close together.

  • Single pockets Ø 25.4 mm, 1.8 mm deep with a 0.6 mm lead-in, floor 1.2 mm, webs 1.6 mm, rim 2.0 mm.
  • Staggered (honeycomb): two rows offset by half a pitch, more compact than two straight rows.
  • 25 mm grid for rank & flank: the bases stand edge to edge on the 25 mm grid; the pockets merge (the circles overlap by 0.4 mm, the points between them are rounded). 10 wide in two parts with dovetails in the floor, split through the middle of a column; plugged together, a drop of glue if needed.
  • No magnets: The pockets guide the bases sideways, they sit loose in them.

In the set: Every arrangement, each as its own file: Rows, 1 deep (3 × 1, 4 × 1, 5 × 1); Rows, 2 deep (3 × 2, 4 × 2, 5 × 2); Staggered honeycomb (3+2, 3+3, 4+3, 4+4, 5+4, 5+5); 25 mm grid, base to base (3 × 1, 5 × 1, 5 × 2, 5 × 3, 5 × 4, 10 × 2). Example: 5 × 2, outside 137.4 × 56.4 mm. The stated print time, filament amount, dimensions and weight refer to the example tray 5 × 2 only, not to the whole set.

Dimensions: Basis: nominal sizes of common plastic bases (retailer tables), foot sizes from a public measuring template. Every pocket is Ø nominal size + 0.4 mm (0.2 mm per side) with a 0.6 mm lead-in. Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). If your bases only fit a larger clearance stage of the test set, scale the file in X and Y only in the slicer: factor = (nominal size + wanted clearance) ÷ (nominal size + 0.4). The 0.4 mm clearance is our assumption in the middle of the 0.3 to 1.0 mm range that trays on the market use (estimate). Our part has not been printed or tested yet. Print the free fit test set first: it shows with your own bases and printer which clearance fits.

Material: PLA, 0.4 mm nozzle, ideally 0.12 mm layers, no supports; PETG works too. PLA deforms in a hot car, so do not leave the parts there.

Made by base size, not for a particular game; no miniatures included.

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Dimensions

Width137 mm
Height3 mm
Depth56 mm
Weight (printed)14 g
Layer height0.12 mm
Walls2
Infill15 %

Dimensions and weight refer to the example tray 5 × 2 in print orientation, not to the whole set.

Material and temperature

Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Print orientation: Flat, as the files are laid out, no supports.

Safety notice

Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing. Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.

Not an original part. No affiliation with the manufacturers named; brand and model names only indicate fitment.

What's included

You get one ZIP with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD

Printing

  1. PLA (or PETG), 0.4 mm nozzle, 0.12 mm layers, 2 walls, 15 % infill, no supports.

Installation

  1. Grid 10 wide: press part _b onto the dovetails of _a from above, a drop of glue if needed.

FAQ

Which material should I use for this tabletop accessory?

Recommended: PLA (alternatively PETG). Print trays, converters, smooth bases and flight stands in PLA (0.4 mm nozzle); PETG works too. The textured bases are meant for resin; FDM with a 0.2 mm nozzle is the alternative. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully. Also make sure the room is well ventilated.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Have you printed and tested the part?

Not yet. Our part has not been printed or tested yet. That is why you should print the free fit test set first and then a single part.

Do the bases stay in without magnets?

The pockets guide the bases sideways, so they move along when you slide the part across the table. They sit loose: if you lift the part at an angle they can fall out. Magnets are not intended.

My bases sit too tight or too loose. What now?

Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). If your bases only fit a larger clearance stage of the test set, scale the file in X and Y only in the slicer: factor = (nominal size + wanted clearance) ÷ (nominal size + 0.4).

Is this for a particular game?

No. We build by base size and name no games or makers. Which base size and which formation you need is in your rules.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 6 November 2026 · SKU F2-TT-TRAY-RD25

    More tabletop accessories

    All tabletop accessories