52 mm gauge pod for roll cages and tubes Ø 30–60 mm with gauge installed
  • 52 mm gauge pod for roll cages and tubes Ø 30–60 mm from behind, cable exit
  • 52 mm gauge pod for roll cages and tubes Ø 30–60 mm without gauge
  • 52 mm gauge pod for roll cages and tubes Ø 30–60 mm with gauge installed

Universal – fits any car

52 mm gauge pod for roll cages and tubes Ø 30–60 mm – hose-clamp mount

V-block for cage tubes Ø 30–60 mm, holds a 52 mm gauge. Two hose clamps, no drilling or welding.

Choose a version
€4.99incl. VAT

Sale and payment processing by Sold through Link, LLC (Stripe); Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

  • Instant download
  • Updates included
  • Secure via Stripe

Description

The pod sits on any tube from Ø 30 to 60 mm (roll bar, cage cross bar, interior strut bar) with a 90° V-block and holds a 52 mm gauge.

  • The V-block centres itself, so there are no tube size variants.
  • Two slots (14 × 3 mm) take hose clamps 9–12 mm or wide cable ties.
  • The cable runs through the block into the V-groove and along the tube.
  • An M3 set screw secures the gauge.
  • Prints V-groove down on the bed, no supports.

Tip: a strip of rubber or TPU tape in the V-groove stops it from turning and protects the tube's paint.

Any tube diameter in range; rubber tape in the V-groove evens out the paint.

Dimensions

Width60 mm
Height98 mm
Depth62 mm
Bore52.79 mm
Weight (printed)96 g
Layer height0.2 mm
Walls4
Infill20 %

Dimensions of the default variant in print orientation.

Material and temperature

Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Print orientation: V-groove down on the bed, cup pointing up.

Guide: PETG or ASA in a car?

Safety notice

Do not mount in the head-strike zone of driver or passenger and do not remove required cage padding. Motorsport series rules apply. Check the clamps before every drive. Install at your own risk. Never mount in an airbag deployment zone, never cover controls, never restrict the view. Follow the material and temperature advice. Add-ons may affect the type approval of the vehicle (§ 19 StVZO in Germany); keep edges in the head and knee area rounded (UN Regulation No. 21).

Not an original part. No affiliation with the vehicle manufacturers named; make and model names only indicate fitment.

What's included

  • toleranz-testring-52mm.stl – Tolerance test ring
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.stl – STL – print-ready mesh
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.3mf – 3MF – with print profile
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.step – STEP – editable in CAD
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.stl – STL – print-ready mesh
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.3mf – 3MF – with print profile
  • ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.step – STEP – editable in CAD
VersionContainsPrice
52 mm gaugetoleranz-testring-52mm.stl, ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.stl, ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.3mf, ueberrollbuegel-gauge-pod-52mm-60mm_gauge52.step€4.99
60 mm gaugetoleranz-testring-52mm.stl, ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.stl, ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.3mf, ueberrollbuegel-gauge-pod-52mm-60mm_gauge60.step€4.99

You will also need

  • 2 × Hose clamp, 9–12 mm band, sized for the tube + 60 mm
  • 1 × M3 set screw or self-tapping M3 screw, 8–10 mm

Printing

  1. Print the tolerance test ring first and test-fit the gauge.
  2. Print in PETG or ASA, 0.2 mm layers, 4 walls, 20 % infill, no supports. No PLA.

Installation

  1. Feed the cable through the block, insert the gauge and secure it with the set screw.
  2. Thread the hose clamps through the slots, place the pod on the tube and align it.
  3. Tighten the clamps evenly until the pod no longer turns.

Guides for this part

FAQ

Which material should I use for this gauge pod?

Recommended: PETG (alternatively ASA, PA-CF). Shaded location: PETG is sufficient, ASA is the more robust choice. PLA is unsuitable in a car – it starts to soften at about 55–60 °C.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Does a 60 mm gauge fit?

Yes, in the “60 mm” variants: 60.4 mm bore for gauges with a 60 mm housing (e.g. Defi 60); the front ring rests on the cup rim. Gauges with a 52 mm housing take the 52 mm variant.

Version 3.0.0, updated 2 November 2026 · SKU GP-UNI-CAGE-1X52

Gauge pods for other cars

All gauge pods