Dual 52 mm gauge pod for the cupholder – universal, no drilling

Description

The pod drops into the cupholder and holds two 52 mm gauges side by side, tilted 45° toward the driver. Nothing on the car is drilled or modified.

• Six crush ribs absorb cupholder tolerances.
• A pedestal supports each cup across its full width and keeps heavy gauges steady.
• The cable exits at the back above the cupholder rim.
• One M3 set screw per gauge secures them.
• The insert is hollow with a self-supporting cone roof: less filament, no supports.

Pick the variant that matches your cupholder's inner diameter (70, 75, 80 or 85 mm). The bore is 52.79 mm, slightly larger than the nominal 52.39 mm; a tolerance test ring is included.

Crush ribs absorb ±0.5 mm; bore +0.4 mm, verify with the test ring.

Dimensions

Dimensions of the default variant in print orientation.

Material and temperature

Location out of direct sun: PETG works, ASA as well. Still no PLA – a parked car gets very hot inside.

Print orientation: Insert down on the bed, cup pointing up.

Guide: PETG or ASA in a car?

Safety notice

Use in the cupholder only. The gauge must not cover controls or reach into an airbag zone. Install at your own risk. Never mount in an airbag deployment zone, never cover controls, never restrict the view. Follow the material and temperature advice. Add-ons may affect the type approval of the vehicle (§ 19 StVZO in Germany); keep edges in the head and knee area rounded (UN Regulation No. 21).

Not an original part. No affiliation with the vehicle manufacturers named; make and model names only indicate fitment.

What's included

• toleranz-testring-52mm.stl – Tolerance test ring
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge52.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge52.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge52.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge52.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge52.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge52.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge52.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge52.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge52.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge52.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge52.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge52.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge60.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge60.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup70_gauge60.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge60.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge60.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup75_gauge60.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge60.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge60.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup80_gauge60.step – STEP – editable in CAD
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge60.stl – STL – print-ready mesh
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge60.3mf – 3MF – with print profile
• becherhalter-gauge-pod-doppelt-52mm-60mm_cup85_gauge60.step – STEP – editable in CAD

You will also need

• 2 × M3 set screw or self-tapping M3 screw, 8–10 mm

Printing

1. Print the tolerance test ring first and test-fit the gauge. If +0.4 mm does not fit, adjust the bore in the STEP file.
2. Print in PETG or ASA, 0.2 mm layers, 4 walls, 20 % infill, no supports. No PLA.

Installation

1. Slide the gauge in from the front until the bezel rests on the rim; route the cable out the back.
2. Tighten the M3 set screw hand-tight.
3. Press the pod into the cupholder and turn it toward the driver.

Guides for this part

• Gauge pod without drilling: cupholder, vent, steering column, dashboard or cage?

FAQ

Version 5.0.0, updated 2 November 2026 · SKU GP-UNI-CUP-2X52