Stand for player aids and reference cards with placeholder contents (no artwork)

Board game accessories

Stand for player aids and reference cards – 10 card formats, 1 or 2 cards

Angled stand that props player aids and reference cards up in front of you, sleeved or not. For one or two cards side by side, no supports.

Choose a version
€1.49incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

The card leans back 20° against a rest, a low lip holds its bottom edge and two cheeks guide it at the sides. The reference card no longer lies flat or slides away.

  • One stand per format, for one card or two side by side (with a centre cheek).

  • For 1–4 cards behind each other: 2.5 mm gap between lip and rest; any card height, the rest is 45 mm long.

  • Standard American (56 × 87 mm): card width inside 61 mm; stand 65.8 mm (1 card) or 129.2 mm (2 cards) wide

  • Standard European (59 × 92 mm): card width inside 64 mm; stand 68.8 mm (1 card) or 135.2 mm (2 cards) wide

  • Mini American (41 × 63 mm): card width inside 46 mm; stand 50.8 mm (1 card) or 99.2 mm (2 cards) wide

  • Mini European (44 × 68 mm): card width inside 48 mm; stand 52.8 mm (1 card) or 103.2 mm (2 cards) wide

  • TCG / poker (63.5 × 88 mm): card width inside 68 mm; stand 72.8 mm (1 card) or 143.2 mm (2 cards) wide

  • Tarot (70 × 120 mm): card width inside 75 mm; stand 79.8 mm (1 card) or 157.2 mm (2 cards) wide

  • Square 70 (70 × 70 mm): card width inside 75 mm; stand 79.8 mm (1 card) or 157.2 mm (2 cards) wide

  • Big Square 80 (80 × 80 mm): card width inside 84 mm; stand 88.8 mm (1 card) or 175.2 mm (2 cards) wide

  • Japanese / small (59 × 86 mm): card width inside 64 mm; stand 68.8 mm (1 card) or 135.2 mm (2 cards) wide

  • 70 × 110: card width inside 74 mm; stand 78.8 mm (1 card) or 155.2 mm (2 cards) wide

Dimensions: Width taken from the Gamegenic datasheet (sleeve outer size + 2 mm); our part has not been tested with cards yet. Print the free sleeve fit ring first if you are unsure about your sleeves.

Material: PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.

Not a toy. Storage for game components and small parts; keep out of reach of small children.

Dimensions

Width66 mm
Height45 mm
Depth38 mm
Weight (printed)17 g
Layer height0.2 mm
Walls2
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.

Print orientation: On its base.

Safety notice

Not a toy. Storage for game components and small parts; keep out of reach of small children. Do not store in the sun or a hot car. Not a toy. Storage for game components and small parts; keep out of reach of small children.

Not an original part. No affiliation with the vehicle or device manufacturers named; make and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
Standard American (56 × 87 mm), 1 cardkartenstaender-spielerhilfe_standard-american-1x.stl, kartenstaender-spielerhilfe_standard-american-1x.3mf, kartenstaender-spielerhilfe_standard-american-1x.step€1.49
Standard American (56 × 87 mm), 2 cardskartenstaender-spielerhilfe_standard-american-2x.stl, kartenstaender-spielerhilfe_standard-american-2x.3mf, kartenstaender-spielerhilfe_standard-american-2x.step€1.49
Standard European (59 × 92 mm), 1 cardkartenstaender-spielerhilfe_standard-european-1x.stl, kartenstaender-spielerhilfe_standard-european-1x.3mf, kartenstaender-spielerhilfe_standard-european-1x.step€1.49
Standard European (59 × 92 mm), 2 cardskartenstaender-spielerhilfe_standard-european-2x.stl, kartenstaender-spielerhilfe_standard-european-2x.3mf, kartenstaender-spielerhilfe_standard-european-2x.step€1.49
Mini American (41 × 63 mm), 1 cardkartenstaender-spielerhilfe_mini-american-1x.stl, kartenstaender-spielerhilfe_mini-american-1x.3mf, kartenstaender-spielerhilfe_mini-american-1x.step€1.49
Mini American (41 × 63 mm), 2 cardskartenstaender-spielerhilfe_mini-american-2x.stl, kartenstaender-spielerhilfe_mini-american-2x.3mf, kartenstaender-spielerhilfe_mini-american-2x.step€1.49
Mini European (44 × 68 mm), 1 cardkartenstaender-spielerhilfe_mini-european-1x.stl, kartenstaender-spielerhilfe_mini-european-1x.3mf, kartenstaender-spielerhilfe_mini-european-1x.step€1.49
Mini European (44 × 68 mm), 2 cardskartenstaender-spielerhilfe_mini-european-2x.stl, kartenstaender-spielerhilfe_mini-european-2x.3mf, kartenstaender-spielerhilfe_mini-european-2x.step€1.49
TCG / poker (63.5 × 88 mm), 1 cardkartenstaender-spielerhilfe_standard-tcg-1x.stl, kartenstaender-spielerhilfe_standard-tcg-1x.3mf, kartenstaender-spielerhilfe_standard-tcg-1x.step€1.49
TCG / poker (63.5 × 88 mm), 2 cardskartenstaender-spielerhilfe_standard-tcg-2x.stl, kartenstaender-spielerhilfe_standard-tcg-2x.3mf, kartenstaender-spielerhilfe_standard-tcg-2x.step€1.49
Tarot (70 × 120 mm), 1 cardkartenstaender-spielerhilfe_tarot-1x.stl, kartenstaender-spielerhilfe_tarot-1x.3mf, kartenstaender-spielerhilfe_tarot-1x.step€1.49
Tarot (70 × 120 mm), 2 cardskartenstaender-spielerhilfe_tarot-2x.stl, kartenstaender-spielerhilfe_tarot-2x.3mf, kartenstaender-spielerhilfe_tarot-2x.step€1.49
Square 70 (70 × 70 mm), 1 cardkartenstaender-spielerhilfe_square-70-1x.stl, kartenstaender-spielerhilfe_square-70-1x.3mf, kartenstaender-spielerhilfe_square-70-1x.step€1.49
Square 70 (70 × 70 mm), 2 cardskartenstaender-spielerhilfe_square-70-2x.stl, kartenstaender-spielerhilfe_square-70-2x.3mf, kartenstaender-spielerhilfe_square-70-2x.step€1.49
Big Square 80 (80 × 80 mm), 1 cardkartenstaender-spielerhilfe_square-80-1x.stl, kartenstaender-spielerhilfe_square-80-1x.3mf, kartenstaender-spielerhilfe_square-80-1x.step€1.49
Big Square 80 (80 × 80 mm), 2 cardskartenstaender-spielerhilfe_square-80-2x.stl, kartenstaender-spielerhilfe_square-80-2x.3mf, kartenstaender-spielerhilfe_square-80-2x.step€1.49
Japanese / small (59 × 86 mm), 1 cardkartenstaender-spielerhilfe_japanese-small-1x.stl, kartenstaender-spielerhilfe_japanese-small-1x.3mf, kartenstaender-spielerhilfe_japanese-small-1x.step€1.49
Japanese / small (59 × 86 mm), 2 cardskartenstaender-spielerhilfe_japanese-small-2x.stl, kartenstaender-spielerhilfe_japanese-small-2x.3mf, kartenstaender-spielerhilfe_japanese-small-2x.step€1.49
70 × 110, 1 cardkartenstaender-spielerhilfe_magnum-70x110-1x.stl, kartenstaender-spielerhilfe_magnum-70x110-1x.3mf, kartenstaender-spielerhilfe_magnum-70x110-1x.step€1.49
70 × 110, 2 cardskartenstaender-spielerhilfe_magnum-70x110-2x.stl, kartenstaender-spielerhilfe_magnum-70x110-2x.3mf, kartenstaender-spielerhilfe_magnum-70x110-2x.step€1.49

Printing

  1. PLA (or PETG), 0.2 mm layers, 2 walls, 15 % infill, no supports.
  2. Standing on its base, as the file is laid out.

FAQ

Which material should I use for this card box?

Recommended: PLA (alternatively PETG). PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Which material?

PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.

Are there magnets?

No. Lids hold by friction, a groove or a snap nose; magnets are deliberately left out.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 4 November 2026 · SKU BG-CARD-STAND

    Board game accessories for other cars

    All board game accessories