Deck box for 100 double-sleeved TCG cards with token compartment with placeholder contents (no artwork)

Board game accessories

Deck box for 100 double-sleeved TCG cards with token compartment – friction lid, no magnets

Deck box for 100 double-sleeved cards in TCG size plus a token compartment. Two depths for thin or thick inner sleeves; the lid holds by friction.

Choose a version
€2.90incl. VAT

The seller is Sold through Link, LLC (Stripe), which also processes the payment; Link's "Sold through Link" terms apply and Link sends the receipt. You choose payment methods such as card, Apple Pay, Google Pay and Link in the next step. The download is available right after payment. As an EU consumer you can cancel within 14 days of receiving access (cancellation policy). Our licence terms apply to the files.

Licence: use and print for yourself; do not share or sell the files or printed parts. Licence terms · Print commercially or subscribe? Register interest

Description

The deck stands upright in the base, behind it a 15 mm compartment for tokens, dice and counters. The lid slides over the base and holds by friction; finger notches on both sides help to take the deck out.

  • Two depths: 70 mm (thin inner + outer sleeve) and 82 mm (thick inner sleeve).
  • Inside 68 × 93 mm for 66 × 91 mm TCG sleeves.
  • No magnets: lid with 0.15 mm play per side, 12 mm overlap.

Dimensions: Inner sizes taken from the Gamegenic datasheet (sleeve outer size + 2 mm), stack height computed (±4–6 mm); our part has not been tested with cards yet. Print the free sleeve fit ring first if you are unsure about your sleeves.

Material: PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.

Not a toy. Storage for game components and small parts; keep out of reach of small children.

If your printer prints inner sizes tight, the lid jams: scale the lid to 101 % in X/Y.

Dimensions

Width71 mm
Height74 mm
Depth90 mm
Weight (printed)98 g
Layer height0.2 mm
Walls2
Infill15 %

Dimensions of the default variant in print orientation.

Material and temperature

PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.

Print orientation: Base upright, lid upside down.

Safety notice

Not a toy. Storage for game components and small parts; keep out of reach of small children. Do not store in the sun or a hot car. Not a toy. Storage for game components and small parts; keep out of reach of small children.

Not an original part. No affiliation with the vehicle or device manufacturers named; make and model names only indicate fitment.

What's included

You get one ZIP for the version you choose, with:

  • STL – print-ready mesh
  • 3MF – with print profile
  • STEP – editable in CAD
Files per version
VersionContainsPrice
thin inner sleeve (70 mm)deckbox-100-doppelt-gesleevt_inner-duenn-70mm_unterteil.stl, deckbox-100-doppelt-gesleevt_inner-duenn-70mm_unterteil.3mf, deckbox-100-doppelt-gesleevt_inner-duenn-70mm_unterteil.step, deckbox-100-doppelt-gesleevt_inner-duenn-70mm_deckel.stl, deckbox-100-doppelt-gesleevt_inner-duenn-70mm_deckel.3mf, deckbox-100-doppelt-gesleevt_inner-duenn-70mm_deckel.step€2.90
thick inner sleeve (82 mm)deckbox-100-doppelt-gesleevt_inner-dick-82mm_unterteil.stl, deckbox-100-doppelt-gesleevt_inner-dick-82mm_unterteil.3mf, deckbox-100-doppelt-gesleevt_inner-dick-82mm_unterteil.step, deckbox-100-doppelt-gesleevt_inner-dick-82mm_deckel.stl, deckbox-100-doppelt-gesleevt_inner-dick-82mm_deckel.3mf, deckbox-100-doppelt-gesleevt_inner-dick-82mm_deckel.step€2.90

Printing

  1. PLA (or PETG), 0.2 mm layers, 2 walls, 15 % infill, no supports.
  2. Base upright, lid with its top face down.

FAQ

Which material should I use for this card box?

Recommended: PLA (alternatively PETG). PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.

Do I receive a printed part?

No. You get the print files and print the part yourself or use a print service. You get the download link right after payment.

Which material?

PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.

Are there magnets?

No. Lids hold by friction, a groove or a snap nose; magnets are deliberately left out.

Reviews

No reviews yet.

    How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.

    Version 1.0.0, updated 3 November 2026 · SKU BG-DECKBOX-100

    Board game accessories for other cars

    All board game accessories