Box for 16 mm game pieces – 4 or 6 compartments by player colour, sliding lid
Universal – fits any car
from€1.49
Board game accessories
Sleeve fit ring – check inner size and stack height, 10 card formats
Free test part: does your sleeved card fit our card boxes, and how tall are 20 cards? One frame per format, 3–6 g.
Description
A small frame with exactly the inner size of our card boxes. Put your sleeved card in: it should sit loosely without jamming. Then stack 20 cards inside and compare them with the two notches on the gauge post.
Lower notch (8.8 mm): 20 cards in standard sleeves. If your 20 cards stay below it, 100 fit the "standard sleeves" box.
Upper notch (11.2 mm): 20 cards in premium or board-game sleeves (90–120 µm).
One frame per format, a few minutes of print time; all ten formats in the download.
Standard American (56 × 87 mm): inside 61 × 93 mm
Standard European (59 × 92 mm): inside 64 × 96 mm
Mini American (41 × 63 mm): inside 46 × 69 mm
Mini European (44 × 68 mm): inside 48 × 73 mm
TCG / poker (63.5 × 88 mm): inside 68 × 93 mm
Tarot (70 × 120 mm): inside 75 × 124 mm
Square 70 (70 × 70 mm): inside 75 × 75 mm
Big Square 80 (80 × 80 mm): inside 84 × 84 mm
Japanese / small (59 × 86 mm): inside 64 × 91 mm
70 × 110: inside 74 × 114 mm
Dimensions: Inner sizes taken from the Gamegenic datasheet (sleeve outer size + 2 mm), stack height computed (±4–6 mm). The ring itself has not been tested with cards yet.
Material: PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Not a toy. Storage for game components and small parts; keep out of reach of small children.
Inner size = sleeve outer size per datasheet + 2 mm (1 mm per side).
Dimensions
| Width | 64 mm |
|---|---|
| Height | 12 mm |
| Depth | 96 mm |
| Weight (printed) | 4 g |
| Layer height | 0.2 mm |
| Walls | 2 |
| Infill | 15 % |
Dimensions of the default variant in print orientation.
Material and temperature
PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.
Print orientation: Lying as the file is laid out, no supports.
Safety notice
Not a toy. Storage for game components and small parts; keep out of reach of small children. Do not store in the sun or a hot car. Not a toy. Storage for game components and small parts; keep out of reach of small children.
Not an original part. No affiliation with the vehicle or device manufacturers named; make and model names only indicate fitment.
What's included
You get one ZIP for the version you choose, with:
- STL – print-ready mesh
- 3MF – with print profile
- STEP – editable in CAD
Files per version
| Version | Contains | Price |
|---|---|---|
| Standard American (56 × 87 mm) | huellen-passform-ring_standard-american.stl, huellen-passform-ring_standard-american.3mf, huellen-passform-ring_standard-american.step | €0.00 |
| Standard European (59 × 92 mm) | huellen-passform-ring_standard-european.stl, huellen-passform-ring_standard-european.3mf, huellen-passform-ring_standard-european.step | €0.00 |
| Mini American (41 × 63 mm) | huellen-passform-ring_mini-american.stl, huellen-passform-ring_mini-american.3mf, huellen-passform-ring_mini-american.step | €0.00 |
| Mini European (44 × 68 mm) | huellen-passform-ring_mini-european.stl, huellen-passform-ring_mini-european.3mf, huellen-passform-ring_mini-european.step | €0.00 |
| TCG / poker (63.5 × 88 mm) | huellen-passform-ring_standard-tcg.stl, huellen-passform-ring_standard-tcg.3mf, huellen-passform-ring_standard-tcg.step | €0.00 |
| Tarot (70 × 120 mm) | huellen-passform-ring_tarot.stl, huellen-passform-ring_tarot.3mf, huellen-passform-ring_tarot.step | €0.00 |
| Square 70 (70 × 70 mm) | huellen-passform-ring_square-70.stl, huellen-passform-ring_square-70.3mf, huellen-passform-ring_square-70.step | €0.00 |
| Big Square 80 (80 × 80 mm) | huellen-passform-ring_square-80.stl, huellen-passform-ring_square-80.3mf, huellen-passform-ring_square-80.step | €0.00 |
| Japanese / small (59 × 86 mm) | huellen-passform-ring_japanese-small.stl, huellen-passform-ring_japanese-small.3mf, huellen-passform-ring_japanese-small.step | €0.00 |
| 70 × 110 | huellen-passform-ring_magnum-70x110.stl, huellen-passform-ring_magnum-70x110.3mf, huellen-passform-ring_magnum-70x110.step | €0.00 |
Printing
- PLA (or PETG), 0.2 mm layers, 2 walls, 15 % infill, no supports.
FAQ
Which material should I use for this card box?
Recommended: PLA (alternatively PETG). PLA is enough: the parts bear no load and do not get warm. They are not meant for contact with food. PLA softens in a hot car or in the sun behind glass, so better not leave the parts there.
Do I receive a printed part?
No. You get the print files and print the part yourself or use a print service. We email you the download link.
My card jams in the frame. What now?
Then your sleeves are larger than the Gamegenic sleeves we design for, or your printer prints inner sizes tighter. Tell us the format and sleeve brand; the boxes are parametric.
Which material?
PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Are there magnets?
No. Lids hold by friction, a groove or a snap nose; magnets are deliberately left out.
Reviews
No reviews yet.
How we check reviews: only people who bought or downloaded the file for free in our shop can review, via the personal link from the download email; once per order and file. Anyone who received the files in return for something (cooperations, gifts, 100% codes) cannot review. We publish all reviews, negative ones too, and only remove unlawful content or spam. There is no reward for reviews.
Version 1.0.0, updated 3 November 2026 · SKU BG-SLEEVE-FIT-RING
Board game accessories for other cars
All board game accessories
Deck box for 100 double-sleeved TCG cards with token compartment – friction lid, no magnets
Universal – fits any car
from€2.90
Card box with sliding lid – 10 card formats, for sleeved and unsleeved cards
Universal – fits any car
from€1.90
