Universal mount for boost controller and OBD displays – slide-in, 60–100 mm wide

Description

For boost controller units, OBD displays, shift lights and similar add-ons without a fitting mount. The unit slides in from the top between two rails; 45° lips hold the front and a stop holds the bottom.

• Variants for 60, 70, 80, 90 and 100 mm device width and 14 or 22 mm thickness (+0.4 mm clearance). Device height does not matter.
• Cable slot in the stop, 14 mm wide.
• Back plate for VHB tape, nothing is drilled.
• Prints on its back plate, no supports.

Measure width and thickness of your device with calipers and pick the next larger variant. A thin foam strip takes up play. On the dashboard print in ASA or ABS only.

Take up play with foam tape; adjust the STEP file for sizes in between.

Dimensions

Dimensions of the default variant in print orientation.

Material and temperature

Location in direct sun: print in ASA or ABS only. A dashboard reaches about 69 °C on average after one hour in the sun, with peaks up to 89 °C. ASA only softens at around 108 °C and is UV resistant. PETG and PLA will warp here.

Print orientation: Back plate down on the bed, rails pointing up.

Guide: PETG or ASA in a car?

Safety notice

Do not stick it on airbag covers or in the view through the windscreen. Check it is secure before driving. Install at your own risk. Never mount in an airbag deployment zone, never cover controls, never restrict the view. Follow the material and temperature advice. Add-ons may affect the type approval of the vehicle (§ 19 StVZO in Germany); keep edges in the head and knee area rounded (UN Regulation No. 21).

Not an original part. No affiliation with the vehicle manufacturers named; make and model names only indicate fitment.

What's included

• universal-halter-obd-boost-display_breite60_dicke14.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite60_dicke14.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite60_dicke14.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite70_dicke14.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite70_dicke14.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite70_dicke14.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite80_dicke14.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite80_dicke14.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite80_dicke14.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite90_dicke14.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite90_dicke14.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite90_dicke14.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite100_dicke14.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite100_dicke14.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite100_dicke14.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite60_dicke22.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite60_dicke22.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite60_dicke22.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite70_dicke22.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite70_dicke22.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite70_dicke22.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite80_dicke22.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite80_dicke22.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite80_dicke22.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite90_dicke22.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite90_dicke22.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite90_dicke22.step – STEP – editable in CAD
• universal-halter-obd-boost-display_breite100_dicke22.stl – STL – print-ready mesh
• universal-halter-obd-boost-display_breite100_dicke22.3mf – 3MF – with print profile
• universal-halter-obd-boost-display_breite100_dicke22.step – STEP – editable in CAD

You will also need

• 1 × VHB tape 3M 5952 or similar

Printing

1. Print in ASA (dashboard) or PETG, 0.2 mm layers, 3 walls, 20 % infill, no supports. No PLA.

Installation

1. Degrease the spot with isopropyl alcohol, apply VHB to the back plate, press for 30 s, let it cure for 24 h.
2. Route the cable through the slot and slide the device in from the top.

Guides for this part

• Gauge pod without drilling: cupholder, vent, steering column, dashboard or cage?

FAQ

Version 2.0.0, updated 1 November 2026 · SKU DM-UNI-DISPLAY-SLIDE